Ok, I took the pics todayso u can see how it looks. I like it I can rest my arm on it instead of my lap.

1) get some sheat metal or any metal that can be bent
2) hindge, look at the 1 I got(its like a L)
3) fabric or sumthin and foam to cover it

To make it first take out the plastic tray, pull it out around the trim. Once its out turn it over on some paper and trace it out. Then transer it on to the paper. Than trace it onto the sheat metal and cut it. Once it fits flush on the center console bend it a bit to fit. Then atach the hindges to the metal and center colsole. Cover with foam and fabric and wala, ur done!

mine dosnt fit flush due to my crapy cover I tryed to make, but when I do it will sit flat

"Only Pirates Say R"
hondahater21@hotmail.com
www.geocities.com/hondahater21

Change Your own Blinker Fluid! --> http://geocities.com/changeyourblinkerfluid/

looks good. I like

nice idea!

My only suggestion is to attach the vinyl to the underside of the top and make a cover plate to sandwich the vinyl into place so you dont see the tie job you got there.

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

i would cut a peice of plywood and use it under the vinal and sheetmetal. It will give you more surport.....

I have been dying for an armrest! looks like a good snowy day project

AFX/UDP,AEM,AF/X 55mm TB,50 shot of NOS,Glenn's short shifter,17" tantrum,prokit KYB AGX,JL stealthbox sony headunit,audiobahn amp,M3 style mirrors,Blue leds,yellow fogs,reverse ind,w

haha that's pretty cool I got one from the junkyard.

http://www.hadesomega.info -car specz and movies 95 Eclipse RS | 76' 280Z | 89' MR2 | 99 Neon | 91 Zephyr
Who sez FF can't drift?