i got the light out (little shizzy thing) and i tested the wires that were attached to it. they are both 12 volts when put to a ground. but when i test accrossed the wires there is no voltage.....
is this right?? pls tell me sumtin here guys.
mods: full exhause cai sparkplugs platnum plus window tint all black interior altezas
future mods(in no particular order): engine swap lower it wheels seats exhaust piant job turbo wing hood body kit neons all around head light housing new altezas new stereo equipment and more that will be kept secret for now
#16509, "RE: quick hvac question" In response to Reply # 0
follow the two red wires into the plug, after the plug you will see two wires, one is green. the green wire is the hot wire. this applies for all gauge lighting in the car, just connect your + of your led to there -- well your resister of course -- and your - to the other wire (NONGREEN) and you'll be set.
#16510, "RE: quick hvac question" In response to Reply # 1
but should they both put out a current of 12V??? i used a voltometer and put the pos to the wire and the neg to a gound in the car. they both put out 12V
but when i put the pos to one wire then the neg to the other.... no voltage
also my hv/ac lights don't work as it is. thats my main reason for doing this. i'm thinking that there might be a short.
also my gauge lights don't work..... i had to ghetto right the ash try light wires to run up to the gauges then put the wires into the bulbs to get 'em to work. then when i did that. the hvac lights worked again.
few months later i noticed i have no hvac lights..... i'm thinking something is wrong
mods: full exhause cai sparkplugs platnum plus window tint all black interior altezas
future mods(in no particular order): engine swap lower it wheels seats exhaust piant job turbo wing hood body kit neons all around head light housing new altezas new stereo equipment and more that will be kept secret for now
#16512, "RE: quick hvac question" In response to Reply # 3
couldn't i just run it from any 12V src that turns on w/the lights?
then put it to a suitable ground.
like i did my gauges
mods: full exhause cai sparkplugs platnum plus window tint all black interior altezas
future mods(in no particular order): engine swap lower it wheels seats exhaust piant job turbo wing hood body kit neons all around head light housing new altezas new stereo equipment and more that will be kept secret for now
#16514, "RE: quick hvac question" In response to Reply # 5
hey don't say that, god forbid that happens. shheeese.
i have no idea where the wires for the lights run but i'm sure gonna tape off all the crap that is in there.
thanks for the advice.
mods: full exhause cai sparkplugs platnum plus window tint all black interior altezas
future mods(in no particular order): engine swap lower it wheels seats exhaust piant job turbo wing hood body kit neons all around head light housing new altezas new stereo equipment and more that will be kept secret for now
Search
Printer-friendly copy
1 User in Chat
