ok i just got a 3" lcd i wana mount in my a pillar. It is made by citazin and thats all I know. It has the pins for the harness, but i didnt get one. this is hoe its set up. there are 8 pins on it. and Im guessing there are 2 pins for power, 2 for the coax wire, and 2 for the bocklight wire. Any clue? If a pic will help, I take 1 when I get home.

"Only Pirates Say R"
hondahater21@hotmail.com
www.geocities.com/hondahater21

Change Your own Blinker Fluid! --> http://geocities.com/changeyourblinkerfluid/

ouch...thats going to be really hard to figure out from the info you gave...can you see the circut board, if so, follow the leads off the pin, to where they go on the board, but first i would search the web, or call the manufacture 2 see if they have any info...

sorry i was no help :S

I'm not sure how to wire it up, but try www.earthlcd.com. They have a bunch of info and stuff on LCDs.

Eklipsdrvr99@hotmail.com

Mike
www.streamlinemotorsportsva.com
http://members.cardomain.com/eklipsdrvr99