been lurking around here for awhile reading through everything.. nice board.. i saw hondahater's post about using leds and hvac.. and how people were having brightness issues. this was corrected by using a 560ohm resistor as opposed to a 3~~ohm resistor.. feeding it more power is good! anyway, i went ahead and did the hvac and the rest of the buttons in that area.. i threw together a quick howto page for anyone who wants to check it out.. props to hondahater for coming up with the inital concept!

it would probably help if i gave the link
http://sabrelink.com/probe/hvac

-brian

I cant get the link to come up...


1999 Mitsubishi Eclipse GS 10th Anniversary Edition
- Weapon R1 Atom Bomb Exhaust

http://www.webphotos.com/list_photos.asp?mi=3&smi=1&a=55649

2002 Subaru Impreza WRX

1999 Mitsubishi Eclipse GS 10th Anniversary OZ Edition

i can't either

2005 Subaru WRX - Not stock.

98 Eclipse - got a little bit on it ;o

89 Celica GT-S - BOOM, bye bye

sorry guys.. im in the middle of updating the webservers so expect the page available by about 5pm EST..


sorry!

What about lengevity of the LEDs? I know they can handle more power but can also burn out from it quickly... like the LED will light without the resistor... jst only last for a handful of seconds probably.

"The world is a dangerous place to live; not because of the people who are evil, but because of the people who don't do anything about it." - Albert Einstein



Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: Ported/Polished Intake Manifold 1/2, Rear disc brake conversion kit w/, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

Nope, when you do the correct mathmatical conversion you will find that you should be running 500-600ohm resistors at about 1/4watt. However, the 1/4watt resistors would potentially overheat so its best to use a 1/2watt.. BTW: The site is back up now.

>What about lengevity of the LEDs? I know they can handle
>more power but can also burn out from it quickly... like the
>LED will light without the resistor... jst only last for a
>handful of seconds probably.

Outstanding... I was too lazy to go and get my old physics notes out to get the equation out. My interior is looking a little funny with Blu eindiglo gauge faces blue autometer gauges blue and red stereo and blue S-AFC and then amber HVAC. also need to change the light on my odometers.

"The world is a dangerous place to live; not because of the people who are evil, but because of the people who don't do anything about it." - Albert Einstein



Michael J. Kulaga
e-mail: Michael_97RS@2gntDSM.zzn.com aol IM: MJKulga
http://highlander.dsmpower.com/

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, Crane Fireball HI-6DI2, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors & Carbon Fiber Pads

To Be Installed: Ported/Polished Intake Manifold 1/2, Rear disc brake conversion kit w/, Rear KVR Cross Drilled Rotors & Carbon Fiber Kevlar Pads, SS Brake Lines

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

umm not to be a party pooper, but you must not be lurking well enough but hondahater wasnt the one to come up with the initial idea.. nor was i, but it was poplife who did and i was able to take it alittle further and also provide much help to those that questioned.. but non the less welcome and nice work... hondahater has contributed much to the led conversions too, so props to him too of course.

-Jason

97 Talon ESi-T (forever in progress...)


95 GS (Gone)
16.74@83.18mph
119.8 whp - 113.3 lbs/ft


2GNT #677
My Wiki Page: www.2gnt.com/index.php?d=Iamnotwhoiam
Pictures: http://picasaweb.google.com/iamnotwhoiam/Talon/

Why does everyone do blue? Anyone done a nice bright red lighting version?

Also is there an easy way to get the numbers in the speedometer to be colored too without getting new indiglo version or whatever?

CAI | GS-t Muffler | AFX UDP! | And occasionally no PS

Credit goes to iamnotwhoiam, he helped me out beg time when I needed it (doing to LED conversion). So anyway the 500 something ohm resistors would work better? The LED shines brighter? I really don't want to get back into my cluster and change out all the LEDs but I guess I could if the brightness was drastically increased. Got any pics?


Coo'
alex_ries@hotmail.com

Coo'
alex_ries@hotmail.com

hehe.. im so tempted to see if the 560ohm will work better, so tempted im going to try it out.. ill post pics and whats not when i find out.. btw.. thanks for the info dsmprobe and welcome to "led master" status.. hehe

-Jason

97 Talon ESi-T (forever in progress...)


95 GS (Gone)
16.74@83.18mph
119.8 whp - 113.3 lbs/ft


2GNT #677
My Wiki Page: www.2gnt.com/index.php?d=Iamnotwhoiam
Pictures: http://picasaweb.google.com/iamnotwhoiam/Talon/

ill be helping out dino do a red conversion, so when i do ill post pics..

-Jason

97 Talon ESi-T (forever in progress...)


95 GS (Gone)
16.74@83.18mph
119.8 whp - 113.3 lbs/ft


2GNT #677
My Wiki Page: www.2gnt.com/index.php?d=Iamnotwhoiam
Pictures: http://picasaweb.google.com/iamnotwhoiam/Talon/

k i tried it, but it didnt seem as brigh as before.. but then i got to thinking.. to make the led brigher wouldnt you want more power going to it.. if so the 560 reduces it too low and the 330 accually sends more power to the led thus making it brigher.. this in conjunction with my 3.7volt 20mA Blue Led... strange..

-Jason

97 Talon ESi-T (forever in progress...)


95 GS (Gone)
16.74@83.18mph
119.8 whp - 113.3 lbs/ft


2GNT #677
My Wiki Page: www.2gnt.com/index.php?d=Iamnotwhoiam
Pictures: http://picasaweb.google.com/iamnotwhoiam/Talon/

did you guys ever do a write up on this shiz?

yes see my FIRST post

>did you guys ever do a write up on this shiz?

I tried using green leds. Blue led has that aftermarket look.

96 RST: Star Performance stag
05 scion xb: bolt ons
92 nissan 240sx
07 toyota sienna

Im here! nope It was never my Idea, I just hooked everyone up with leds

"Only Pirates Say R"
hondahater21@hotmail.com
www.geocities.com/hondahater21

Change Your own Blinker Fluid! --> http://geocities.com/changeyourblinkerfluid/

I wrote a long detailed write-up on it. If anyones interested just e-mail me.

______________________________

Ryan
IRyanHester@Hotmail.com

'03 Mazda 6s

i think a welcome is in order here...welcome fellow 2gnt'r lurker guy!

Pictures -

www.JJPhatStrat.com/carpics.htm

Tunes -

www.JJPhatStrat.com/mp3page.htm