Hey, thanks for the blue LED. Do I need to solder the wires from the LED onto the stock wiring? Also, what do you mean on your site by wrapping tape around the base? Is that the actual clear part, of the LED? Thanks!

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

its not neccessary to soder the connection, but you can if you want.. and i bet he means to use tape at the bottom of the led to secure it somehow..

-Jason

97 Talon ESi-T (forever in progress...)


95 GS (Gone)
16.74@83.18mph
119.8 whp - 113.3 lbs/ft


2GNT #677
My Wiki Page: www.2gnt.com/index.php?d=Iamnotwhoiam
Pictures: http://picasaweb.google.com/iamnotwhoiam/Talon/

SO if I don't solder I'm assuming I need to get some butt connectors then?

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

no you dont have 2. I just did the old twist and tape method. AS for wraping tape, I mean right below the led(where it flares out0wrap a bunch of tape to make it bigger to fit in the hole. If you look at one of the pics you can se all the tape on it

"Only Pirates Say R"
hondahater21@hotmail.com
www.geocities.com/hondahater21

Change Your own Blinker Fluid! --> http://geocities.com/changeyourblinkerfluid/

no you can just tap the wire and wrap it with some electrical tape, but if you want to use but connecters then you can do that too

-Jason

97 Talon ESi-T (forever in progress...)


95 GS (Gone)
16.74@83.18mph
119.8 whp - 113.3 lbs/ft


2GNT #677
My Wiki Page: www.2gnt.com/index.php?d=Iamnotwhoiam
Pictures: http://picasaweb.google.com/iamnotwhoiam/Talon/

804.. i just did mine a couple days ago.. bring it to the track on sat.. and ill help you out.. took me about 15 mins

^^what once was^^


^^what is now.. and permanently^^

Cool, thanks, I'm gonna bring it on saturday, and Eric97GS is gonna bring the tools...thanks

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl