check those out they are suppposed to be SUPER bright The only thing that would have to be done would be fitting them somewhere in the HVAC but im sure it could be done any ideas???
#14429, "RE: Think these may work for HVAC leds??" In response to Reply # 0
i bet they are the same leds i have been telling people to use and have used already.. but hey give it a try and see what happens.. oh and like i said a few times in other posts.. its not entirely the brightness that allows the hvac to light up properly. if you want a bright hvac.. might i suggest using a green led that is really bright.. it shines and transfers much better than the blue.
#14430, "RE: Think these may work for HVAC leds??" In response to Reply # 1
its not really thats its bright its that its 3 different LEDS angled in what would looks like could hit every part of the HVAC... where as one of these could be easily made I might try and get one of these and mount it and see how it goes
#14431, "RE: Think these may work for HVAC leds??" In response to Reply # 2
what the hell?? is that supposed to be some way to trick out your PC?? What will they do next make body kits for your calculator?? or how 'bout indiglo buttons on your keyboard??
I'm not retarded....I'm a very special boy.
96 ESI - 97 - 99 Projectors, full blitz kit dodge viper race yellow, combat wing, painted altezza's, OZ 17's in scorcher TA's// HRC Stage II, True 3" all the way back. Symborski, CF clutch, AGX adj, spor
#14433, "RE: Think these may work for HVAC leds??" In response to Reply # 4
that will NEVER fit in the HVAC, you have a hole less than 1/4 diameter to fit a led in... that "thing" is HUGE, don't waste your money on it. I bought some blue LEDS at the electronics shop near me and they light up the HVAC perfectly. The LEDs were 8 bux a piece, but well worth it when i was done.
1998 Mitsubishi Eclipse RS
Makin' It Fast & Stable: Sportline Springs Hotshots 4:1 Header GReddy Cat-Back Exhaust AEM Cold Air Intake Tenzo R Front Upper, Rear Upper and Lower Strut Bars Toyo T1-S 245/45 Tires on 17" Concept Neeper Synchro Wheels
#14434, "RE: Think these may work for HVAC leds??" In response to Reply # 5
very obvious that it would not fit in the same place that the original LED came from im talking about mounting it in a new spot as soon as i get a chance i will get pictures and try and show but at the moment my monitor is fried so im just on a laptop
#14435, "RE: Think these may work for HVAC leds??" In response to Reply # 6
Aiight, it wouldn't work, based on the dimensions they give you on that page it wouldn't fit anywhere on the back of the HVAC. You'd be better off with 3 seperate LEDs and drilling 2 extra small holes somewhere on the back of the HVAC, it would be possible to accomodate 2 little holes than that big box. Trust me, I've been there, done that.
#14437, "RE: Think these may work for HVAC leds??" In response to Reply # 8
the leds i have menchened should do the trick, but hey if you want to try it, go for it.. it never hurts to try.. if i hadnt decided to just go at it like i did all this hype about the leds may have not come about..
but dont credit me even for the idea.. i got the idea from someelse on the board and took it where i could.
Search
Printer-friendly copy
2 Users in Chat
