I did mine Sunday. it's easy to take out, easy to put in. The visors are the wors part - it's a bitch trying to line those damn holes up. It makes a WORLD of difference!
Pics of it soon.. it's totally sweet. I did black with a red sunroof cover. Now if i can just do those ugly ass visors..
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#13120, "RE: Do your headliner.." In response to Reply # 1
If you take the headliner back off, you can easily see the two drain hoses. They use plain spring clamps, so you may want to check the condition of the hoses, pull them, dig around with a coathanger to remove any blockage, and reinstall them with a hose clamp instead. There's two, and if i remember, both are on the driver's side.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#13122, "RE: Do your headliner.." In response to Reply # 3
man i should of just said it was way hard to do and charged u hoes money ahah.. jk
well dino if u figure out how to take apart the visors let me know.. i been rocking no visors since aug when i did my headliner.. got the silver stuff for them.. just dont know how to take them apart..
i think i need to heat the glue thats inside them and take them apart..not sure
I love dino and 2gnt. ####ers (my word) bliz stole it but i let him borrow it
#13125, "RE: Do your headliner.." In response to Reply # 6
what i used black felt 2 yards -- u will have left over HIGH TEMP spray adhesive -- found it at a auto store made for saggin headliners something to cut the fabrtic with.. the means to take out the headliner
go to town
lay headliner with its fab facing up.. lay ur new fab over it cut around it leaving extra to wrap around on all sides
spray a lil bit of adhesive on both sides(mine had to sit there for a min. it didtn come out all watery.. it was kind of stickyyy.. headliner and new fab.. lay felt on top and smooth out with hand.. let dry for a min..
then do ext section.. make sure u wrap it around the headliner good dont worry about overlap its all overed up by moldings..
add extra spray to where the sun visor would sit.. thats the only spot min kinda comes off at but u cantnotice
its pretty simple took me 10 mins to do
I love dino and 2gnt. ####ers (my word) bliz stole it but i let him borrow it