2GNT.com Forums - Viewing topic - I changed my HVAC lights! Too easy

Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers

Printer-friendly copy

0 Users in Chat

Top

2GNT Technical

Interior/Exterior

topic #12788

View in linear mode

Subject: "I changed my HVAC lights! Too easy"

Previous topic | Next topic

HondaHater21	Jan-24-02 01:00 PM
Old School 2GNTer 1750 posts,

#12788, "I changed my HVAC lights! Too easy"

Well, i just changed my HVAC light, and damn that ways 2 easy. I think this is a must do. But If anyone wants, I can make the LED asembly to change the color. I used the radio shack leds and it preaty damn cool.

"Only Pirates Say R"
hondahater21@hotmail.com
www.geocities.com/hondahater21

Change Your own Blinker Fluid! --> http://geocities.com/changeyourblinkerfluid/

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

RE: I changed my HVAC lights! Too easy, All4thaN0okie, Jan-24-02 01:19 PM, #1

RE: I changed my HVAC lights! Too easy, 9D9 MITSU RS, Jan-24-02 01:21 PM, #2

RE: I changed my HVAC lights! Too easy, Tantalus000, Jan-24-02 05:19 PM, #3

RE: I changed my HVAC lights! Too easy, iamnotwhoiam, Jan-24-02 01:38 PM, #4

RE: I changed my HVAC lights! Too easy, HondaHater21, Jan-24-02 01:57 PM, #5

RE: I changed my HVAC lights! Too easy, Team

icjeclipse, Jan-24-02 02:15 PM, #6

RE: I changed my HVAC lights! Too easy, HondaHater21, Jan-24-02 02:36 PM, #7

RE: I changed my HVAC lights! Too easy, damasta, Jan-24-02 02:43 PM, #8

RE: I changed my HVAC lights! Too easy, HondaHater21, Jan-24-02 02:53 PM, #9

RE: I changed my HVAC lights! Too easy, Team

eclipse804, Jan-24-02 02:56 PM, #10

RE: I changed my HVAC lights! Too easy, evan2, Jan-24-02 03:05 PM, #11

RE: I changed my HVAC lights! Too easy, HondaHater21, Jan-24-02 03:09 PM, #12

RE: I changed my HVAC lights! Too easy, Team

icjeclipse, Jan-24-02 03:06 PM, #13

RE: I changed my HVAC lights! Too easy, iamnotwhoiam, Jan-24-02 03:08 PM, #14

RE: I changed my HVAC lights! Too easy, Moderator

EvuLFleA, Jan-24-02 03:27 PM, #15

RE: I changed my HVAC lights! Too easy, Weezle745, Jan-24-02 03:30 PM, #16

RE: I changed my HVAC lights! Too easy, silvreclipsers, Jan-24-02 03:35 PM, #17

RE: I changed my HVAC lights! Too easy, Team

dougie2, Jan-24-02 05:12 PM, #18

RE: I changed my HVAC lights! Too easy, proDMD, Jan-24-02 05:23 PM, #19

RE: I changed my HVAC lights! Too easy, CVedEclipse, Jan-24-02 10:02 PM, #20

RE: I changed my HVAC lights! Too easy, ghostshellx, Jan-24-02 10:31 PM, #21

RE: I changed my HVAC lights! Too easy, bedlam32570, Jan-24-02 10:58 PM, #22

RE: I changed my HVAC lights! Too easy, HondaHater21, Jan-24-02 11:10 PM, #23

RE: I changed my HVAC lights! Too easy, SunBlocker, Jan-25-02 01:21 AM, #24

RE: I changed my HVAC lights! Too easy, iamnotwhoiam, Jan-25-02 02:32 AM, #25

RE: I changed my HVAC lights! Too easy, HondaHater21, Jan-25-02 04:16 AM, #26

RE: I changed my HVAC lights! Too easy, iamnotwhoiam, Jan-25-02 04:30 AM, #27

RE: I changed my HVAC lights! Too easy, Ryan_RS, Jan-25-02 04:53 AM, #28

RE: I changed my HVAC lights! Too easy, HondaHater21, Jan-25-02 05:02 AM, #29

RE: I changed my HVAC lights! Too easy, damasta, Jan-25-02 05:09 AM, #30

RE: I changed my HVAC lights! Too easy, HondaHater21, Jan-25-02 05:28 AM, #31

RE: I changed my HVAC lights! Too easy, iamnotwhoiam, Jan-25-02 05:50 AM, #32

RE: I changed my HVAC lights! Too easy, Team

dougie2, Jan-25-02 05:09 AM, #33

RE: I changed my HVAC lights! Too easy, mcgyvr, Jan-25-02 05:32 AM, #34

RE: I changed my HVAC lights! Too easy, Mystic511, Jan-25-02 06:30 AM, #35

RE: I changed my HVAC lights! Too easy, Mystic511, Jan-25-02 06:32 AM, #36

RE: I changed my HVAC lights! Too easy, Weezle745, Jan-25-02 01:40 PM, #37

RE: I changed my HVAC lights! Too easy, HondaHater21, Jan-25-02 04:23 PM, #38

RE: I changed my HVAC lights! Too easy, Team

eclipse804, Jan-25-02 04:21 PM, #39

RE: I changed my HVAC lights! Too easy, Ryan_RS, Jan-25-02 06:43 PM, #40

RE: I changed my HVAC lights! Too easy, Team

eclipse804, Jan-25-02 06:51 PM, #41

RE: I changed my HVAC lights! Too easy, CVedEclipse, Jan-26-02 01:01 AM, #42

RE: I changed my HVAC lights! Too easy, HondaHater21, Jan-26-02 04:38 AM, #43

RE: I changed my HVAC lights! Too easy, ghostshellx, Jan-27-02 03:55 AM, #44

RE: I changed my HVAC lights! Too easy, jeffgsu, Jan-26-02 07:45 AM, #45

RE: I changed my HVAC lights! Too easy, CVedEclipse, Jan-26-02 08:06 AM, #46

RE: I changed my HVAC lights! Too easy, HondaHater21, Jan-26-02 08:10 AM, #47

RE: I changed my HVAC lights! Too easy, HondaHater21, Jan-26-02 02:23 PM, #48

RE: I changed my HVAC lights! Too easy, jeffgsu, Jan-26-02 05:48 PM, #49

RE: I changed my HVAC lights! Too easy, HondaHater21, Jan-27-02 10:58 AM, #50

All4thaN0okie	Jan-24-02 01:19 PM
Member since Nov 19th 2001 501 posts,

#12789, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 0

sweet... how much would one of those cost????

'95 Eclipse RS
INTERIOR
-Sony CDXM 750
-2 JL Audio 12w0 subs
-Premiere Amp
-CompuStar 2WAS Alarm with Remote Start and Pager
EXTERIOR
-Enkei 15" wheels (came with the car)
-2nd Generation Altezza Tails
-Clear Bumper Lenses
-APC Speed Glo Mirrors (with turn signals)
-Red LED Washer Nozzles
PERFORMANCE
-K&N Filter

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

9D9 MITSU RS	Jan-24-02 01:21 PM
Donating 2GNT member 6845 posts,

#12790, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 1

pics???

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Tantalus000	Jan-24-02 05:19 PM
Member since Jan 25th 2002 423 posts,

#12791, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 2

heres a pic of mine emoji

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

iamnotwhoiam	Jan-24-02 01:38 PM
Donating 2GNT member 2361 posts,

#12792, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 0

good deal bro.. what color did you go with btw..

-Jason

97 Talon ESi-T (forever in progress...)

95 GS (Gone) emoji
16.74@83.18mph
119.8 whp - 113.3 lbs/ft

2GNT #677
My Wiki Page: www.2gnt.com/index.php?d=Iamnotwhoiam
Pictures: http://picasaweb.google.com/iamnotwhoiam/Talon/

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

HondaHater21	Jan-24-02 01:57 PM
Old School 2GNTer 1750 posts,

#12793, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 4

I went with blue from radio shack. I think toal was $6 with everything. $4.83 for the LED, $.80 for the resistor. At least for at the 3 radio shack.

"Only Pirates Say R"
hondahater21@hotmail.com
www.geocities.com/hondahater21

Change Your own Blinker Fluid! --> http://geocities.com/changeyourblinkerfluid/

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

icjeclipse	Jan-24-02 02:15 PM
Old School 2GNTer 871 posts,

#12794, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 5

How much would you want to make the LED set up?

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

HondaHater21	Jan-24-02 02:36 PM
Old School 2GNTer 1750 posts,

#12795, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 6

well, I would just solder up everything so all so all you have to do is take the stock socket out, and plop the new light in.

"Only Pirates Say R"
hondahater21@hotmail.com
www.geocities.com/hondahater21

Change Your own Blinker Fluid! --> http://geocities.com/changeyourblinkerfluid/

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

damasta	Jan-24-02 02:43 PM
Member since Dec 16th 2001 302 posts,

#12796, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 7

So how much $$$ you want?

Coo'
alex_ries@hotmail.com

Coo'
alex_ries@hotmail.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

HondaHater21	Jan-24-02 02:53 PM
Old School 2GNTer 1750 posts,

#12797, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 8

$6, Ill mail it in a standard envolope via snale mail to cut shiping costs. I realy dont care about a profit, the only pain in the ass part is going to radio shack and geting the leds.

"Only Pirates Say R"
hondahater21@hotmail.com
www.geocities.com/hondahater21

Change Your own Blinker Fluid! --> http://geocities.com/changeyourblinkerfluid/

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

eclipse804	Jan-24-02 02:56 PM
Donating 2GNT member 5174 posts,

#12798, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 9

$6 only?? Count me in, if I'm able to get to the socket easily? How do I change it out? Maybe we can get a group going so you can do a bunch at once? Thanks

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

evan2	Jan-24-02 03:05 PM
Old School 2GNTer 3903 posts,

#12799, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 10

i met a dealer down here that does all types of audio stuff..

and he said he had varad..

he can get the blue leds for 3.65 each.. i know they are like 4 bucks reg.. but maybe if we bought in bulk we could get a better deal and then just send them out

I love dino and 2gnt. ####ers (my word) bliz stole it but i let him borrow it

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

HondaHater21	Jan-24-02 03:09 PM
Old School 2GNTer 1750 posts,

#12800, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 11

Hey, I think the varads would be beter n e way, see what you can do. there brighter and they need no resistors.

"Only Pirates Say R"
hondahater21@hotmail.com
www.geocities.com/hondahater21

Change Your own Blinker Fluid! --> http://geocities.com/changeyourblinkerfluid/

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

icjeclipse	Jan-24-02 03:06 PM
Old School 2GNTer 871 posts,

#12801, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 9

You definately got a buyer here. YOu should do the gauge cluster too for $20 shippe emoji

How soon can i order this from you?

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

iamnotwhoiam	Jan-24-02 03:08 PM
Donating 2GNT member 2361 posts,

#12802, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 13

the gauge cluster would be a little more time intensive... mainly due to sanding the backs of the stock gauges down.. not to menchen cost more.. just try 4x7 and thats just the leds.. emoji

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

EvuLFleA	Jan-24-02 03:27 PM
Old School 2GNTer 9791 posts,

#12803, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 14

Im down for $6 or whatever you want to charge emoji

Thanks!

------------------------------------------------
98 ESi
95 GS

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Weezle745	Jan-24-02 03:30 PM
Old School 2GNTer 4068 posts,

#12804, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 15

count me in! When and where do I send to?

--- My 2gnt WIKI contribution ---> http://www.jamlez.com/2gnt

97 Eclipse Spyder

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

silvreclipsers	Jan-24-02 03:35 PM
Donating 2GNT member 1756 posts,

#12805, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 0

I'm in

_____________________
98 Silver Eclipse RS ATX
CAI, header, bored TB, Apex N1, Pro-kit/Tokico combo, custom lower tie bars, cross drilled/slotted rotors

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

dougie2	Jan-24-02 05:12 PM
Old School 2GNTer 2982 posts,

#12806, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 0

You got the 2600mcd radio shack leds, correct? Are they bright enough? Those are the ones I bought but I haven't installed them yet.

I can post a pic of the leds and the packages if anyone needs it for some reason.

Doug

Xtreme Performance Services
Race Engines · Transmissions · Turbo Systems · EFI & Tuning · Fabrication · Welding
www.xtremefabrications.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

proDMD	Jan-24-02 05:23 PM
Old School 2GNTer 580 posts,

#12807, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 18

Im in for $6

AFX/UDP,AEM,AF/X 55mm TB,50 shot of NOS,Glenn's short shifter,17" tantrum,prokit KYB AGX,JL stealthbox sony headunit,audiobahn amp,M3 style mirrors,Blue leds,yellow fogs,reverse ind,w

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

CVedEclipse	Jan-24-02 10:02 PM
Donating 2GNT member 2244 posts,

#12808, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 19

haha.. cool.. this is just the thing for us lazy asses!! plus i dont wanna solder.. im ready with the cash. let us know

^^what once was^^

^^what is now.. and permanently^^

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

ghostshellx	Jan-24-02 10:31 PM
Donating 2GNT member 576 posts,

#12809, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 0

I thought someone was going to do a write up on how to do that along with the gauges

The 2GNT is Gone... and the curse too!!

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

bedlam32570	Jan-24-02 10:58 PM
Member since Jan 09th 2002 1240 posts,

#12810, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 21

you want a write up, i got one on my website with a write up of the indiglo needles(same concept with the gauges but without changing them to white face or clearing the needles, just change out all the bulbs that light the gauges) here's the web addy. www.importenthusiasts.da.ru

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

HondaHater21	Jan-24-02 11:10 PM
Old School 2GNTer 1750 posts,

#12811, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 22

Ill get going on them. Ill get my pics up so you can see the color of it cause if you want it brighter, Id go with varad leds. Ill also send out how I did it 2!

"Only Pirates Say R"
hondahater21@hotmail.com
www.geocities.com/hondahater21

Change Your own Blinker Fluid! --> http://geocities.com/changeyourblinkerfluid/

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

SunBlocker	Jan-25-02 01:21 AM
Old School 2GNTer 471 posts,

#12812, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 23

I'm in, where do I sign?? Do you take Paypal?

Gregg
Green 97 Eclipse RS (Really Slow)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

iamnotwhoiam	Jan-25-02 02:32 AM
Donating 2GNT member 2361 posts,

#12813, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 23

the radioshack ones at 2600mcd are the same brighness as the varad ones.. not sure on the other colors but for the blue it is that way.. believe me.. i have gotten both.. the only way i can think of making it brigter is to add multiple leds behind the hvac and that would take some major customizing.. emoji

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

HondaHater21	Jan-25-02 04:16 AM
Old School 2GNTer 1750 posts,

#12814, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 25

I was thinkin on how to put more in the HVAC, I think you would need a dremel with a fex adapter and drill another hole.

"Only Pirates Say R"
hondahater21@hotmail.com
www.geocities.com/hondahater21

Change Your own Blinker Fluid! --> http://geocities.com/changeyourblinkerfluid/

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

iamnotwhoiam	Jan-25-02 04:30 AM
Donating 2GNT member 2361 posts,

#12815, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 26

yeah pretty much something like that.. what id liket o do is to get that thing out of the car and mess with it.. but from when i was in there last.. that thing isnt going to be easy to get out.. but a flex tool on a dremel sounds like a great idea.. didnt even really think about that..

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Ryan_Hes	Jan-25-02 04:53 AM
Old School 2GNTer 3450 posts,

#12816, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 27

I've also done this mod (I posted a small write up on it in a thread back when) and I know the HVAC very well now. I could Rig up a dozen blue LED's and resistors to wire, and send them out to people relatively cheap. All you guys would have to do it take the 'rig' I send you, snip the old light off and connect the end of my wires to the wires that were connected to your stock bulb. The LED, wire, 330ohm resistor, and soldering are already done for you (by me).

Anyone interested? If so I will get to this asap, I can have them all done in a day or so. E-mail me if interested.

______________________________

Ryan
IRyanHester@Hotmail.com

'03 Mazda 6s

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

HondaHater21	Jan-25-02 05:02 AM
Old School 2GNTer 1750 posts,

#12817, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 28

I will be a few days, I bought 2 leds, and bought radio shack out, So I have to order some more.

"Only Pirates Say R"
hondahater21@hotmail.com
www.geocities.com/hondahater21

Change Your own Blinker Fluid! --> http://geocities.com/changeyourblinkerfluid/

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

damasta	Jan-25-02 05:09 AM
Member since Dec 16th 2001 302 posts,

#12818, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 29

Someone mentioned that the VARADs don't need resistors, is this true? If so it sounds like the way to go, simply because you don't need to do any extra soldering.

Coo'
alex_ries@hotmail.com

Coo'
alex_ries@hotmail.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

HondaHater21	Jan-25-02 05:28 AM
Old School 2GNTer 1750 posts,

#12819, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 30

the varads dont need resistors, but by the time you buy the radioshack leds and resistors, the prices are the same or varad is still more expensive depending on where you get them. Ill go call all the radishacks and have them order a bunch, Im gana need some for that led gauge conversion. 7 right?

"Only Pirates Say R"
hondahater21@hotmail.com
www.geocities.com/hondahater21

Change Your own Blinker Fluid! --> http://geocities.com/changeyourblinkerfluid/

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

iamnotwhoiam	Jan-25-02 05:50 AM
Donating 2GNT member 2361 posts,

#12820, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 30

the resistor is already built into the varad ones i believe but the resistor is cheap.. and easily installed to any led depending on the application.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

dougie2	Jan-25-02 05:09 AM
Old School 2GNTer 2982 posts,

#12821, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 29

You can get as many as you need without worrying about your local radioshack running out of stock by ordering them at radioshack.com. I'm glad to see fellow 2GNTers helping each other out!

276-316 is the Blue LEDs
271-1113 is the 330-Ohm .5 watt Resistors

Doug

Xtreme Performance Services
Race Engines · Transmissions · Turbo Systems · EFI & Tuning · Fabrication · Welding
www.xtremefabrications.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

mcgyvr	Jan-25-02 05:32 AM
Old School 2GNTer 3121 posts,

#12822, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 33

f&%k radio shack get them from www.digikey.com you can get blue led's for $1.50, and other colors for like $.30 cents , want to be really cool get bi-color led's (example green/red) and run a small switch to change color plus resistors are max $.10 cents

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Mystic511	Jan-25-02 06:30 AM
Donating 2GNT member 1582 posts,

#12823, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 34

awesome, talk about saving time and effort. you are the man.

I want in too! sending you an email..

16.1 @ 87.11
http://www.virtuallyinfamous.com

ARD 57mm tb and p&p manifold, Neuspeed STB, Pro-kits, Illuminas, Injen CAI with K&N, 2.5" pacesetter catback,
AF/X UDP, Rear STB, Powerslot rotors, RRE SS Brakelines.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Mystic511	Jan-25-02 06:32 AM
Donating 2GNT member 1582 posts,

#12824, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 35

yo mangs... we all need to leave this guy some feedback for his hard work.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Weezle745	Jan-25-02 01:40 PM
Old School 2GNTer 4068 posts,

#12825, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 36

Did you count me in HondaHater?

--- My 2gnt WIKI contribution ---> http://www.jamlez.com/2gnt

97 Eclipse Spyder

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

HondaHater21	Jan-25-02 04:23 PM
Old School 2GNTer 1750 posts,

#12826, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 37

Well, Im gana just order a bunch, and Whatever I dont use I can just return right? I hate taking peoples money when I dont have anything ready to go, if you give me money now, I go into lazy mode and will get it done in 3 months. Tomorow I will be doing some work on the car, so I will take picks on how to solder and hook up the radioshack leds so anyone can do it.

"Only Pirates Say R"
hondahater21@hotmail.com
www.geocities.com/hondahater21

Change Your own Blinker Fluid! --> http://geocities.com/changeyourblinkerfluid/

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

eclipse804	Jan-25-02 04:21 PM
Donating 2GNT member 5174 posts,

#12827, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 28

Ryan, have you also done the stock gauge cluster? How hard is that to do? And how hard is it to access the HVAC bulb. What do I need to take off? Thanks...I'm very interested.

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Ryan_Hes	Jan-25-02 06:43 PM
Old School 2GNTer 3450 posts,

#12828, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 39

WEll, the guage cluster is a bit different, but still similar. Okay, Ill write a little "mini write-up"

1) Remove the timr around the gauges. THere are two phillips head screws going upwards, remove those. Then get a flat head screwdriver and pop the trim out, I wedged the flathead into the edge near the bottom on the right and left, and slowly pryed around it until it came out. Lowering your steering wheels usinh the 'hydrolic lever' helps.

2) Remove the gauge cluster, there are four phillips head screws in the corners, remove them and set them aside. Then use your hands on the sides and slowly, but firly pull on the cluster. It will 'unplug' and come out. Not take that bitch inside.

3) There are several layers to the gauge cluster, use clips to remover the top clear plastic layer. Then use the clips to remove the black bezel gauge cover. (These 'layers' are kinda hard to get off, just make sure the clips are pressd down firmly and 'wrestle' with it)

4) After the black Bezel is off, you have access to the actual gauges. The tach and speedo needles are resting at zero. Pull then down (not off) pull it down and gently over the little 'nub' that stops it normally at zero. Let go and let the needle come to a resting point, it will be near the center. Mark this spot with a pencil or something (Dont to make sure it is calibrated correctly when putting back in).

5) Next, remove the needles (you do this for the tach and the mph) Use a flathead and apply steay pressure outward, and the needles withh slide off, Set them aside.

6) Remove the mph and tach gauges bu pulling them off carefully. (They are attached by a small adhesive, but just lift them off slowly gbreaking their little 'seal'.

7) Now we need to sand the back of the gauges with a small grit sand paper, in order to get rid of the orange tint they have. Hold the gauges up to a different colored light before you start sanding, notice how they are orange no matter what light. Once you sand them down a bit, you'll notice the orange goes away and the background colors will show through. Do this until the bacground color shows through the whole thing. To do this with the fuel and temp gauges, two small phillips head screws need to be removed, but same process is applied.

8) Now Put the guages back into their place. Now we're gonna turb to the back of the gauge cluster. You'll notice the dozens of small lights, and you're most likely unsure what they go to. Well, 7 of them need to be removed and replaced with LED's. $4 a pop at radio shack. That's $28, ouch -- im 18 so thats kind of a bit of money to me..

9) So now you've got your seven LED's ready and you've got your wire ready (oh yeah I forgot to tell you, you need some wire)

The way I did this was by inserting the LED's I have into a socket after removeing a stock bulb. The wrie from the bulb I just wired goes up and kind of fluch with the top of the gauge cluster so I will fit back in. this is tough to explain, but run a set of two bulbs to a 12 volt source in the car (Don't forget to have a reisitor in each of the LED lines! positive or negative it doesnt matter). After running two LED's, run another two into the same 12 volt line, but BEFORE any resistors, or the current will be weak hence not as bright LED's. Do this over and over until all seven are done. I think that does it. Any questions, e-mail me. ywia (your welcome in advance emoji

______________________________

Ryan
IRyanHester@Hotmail.com

'03 Mazda 6s

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

eclipse804	Jan-25-02 06:51 PM
Donating 2GNT member 5174 posts,

#12829, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 40

Cool, thanks for the very detailed write up. Have you thought of putting this up on a web page? If not, I can put one up on my site as a how-to. I was also wondering how to access the HVAC bulb to change it. If you have the time, can you explain that too? Thanks a lot...

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

CVedEclipse	Jan-26-02 01:01 AM
Donating 2GNT member 2244 posts,

#12830, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 41

an important tip for the sanding... only sand the numbers and tick marks.. if you sand more than that, the light will dispearse (sp??) unevenly. if you do just the numbers, the light will still use the oem light spreaders (i guess thats what you can call them) and the light will shine through evenly. i messed up on my speedo sanding too much, and now you can tell where the light bulbs are.. but i did the tach right, and it looks great.. just a little tip to keep in mind..

oh yea, mark me down for a set hondahater.. thanks for doing the dirty work.. pz

^^what once was^^

^^what is now.. and permanently^^

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

HondaHater21	Jan-26-02 04:38 AM
Old School 2GNTer 1750 posts,

#12831, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 42

Hey, I think I can do that, maybe Ill have to do that on my next day off. Also when you have to sand the needels and paint them, could you paont them black or blue? I have white gauges and I wana see them.

"Only Pirates Say R"
hondahater21@hotmail.com
www.geocities.com/hondahater21

Change Your own Blinker Fluid! --> http://geocities.com/changeyourblinkerfluid/

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

ghostshellx	Jan-27-02 03:55 AM
Donating 2GNT member 576 posts,

#12832, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 42

I lucked out when i went to radio shack, they had 7 blue led's, btw that was to easy

The 2GNT is Gone... and the curse too!!

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

jeffgsu	Jan-26-02 07:45 AM
Member since Jan 23rd 2002 292 posts,

#12833, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 0

I changed the lights to blue leds and everything works cool but...
my hvac led isn't bright enough. where can i get a varad led or a brighter light? i used the 5volt from radio shack.
jeff

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

CVedEclipse	Jan-26-02 08:06 AM
Donating 2GNT member 2244 posts,

#12834, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 45

i had the same problem as you hater.. i have white gauges too, so when i sanded them, i decided to paint mine a light grey.. looks good against the white gauges and since my car is silver, it matched.. the only problem with this is, that it doesnt reflect the light as well as a lighter color would.. i would suggest painting them white and maybe going around the edges with another color.. the brighter the needles are, the brighter they will light up.

^^what once was^^

^^what is now.. and permanently^^

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

HondaHater21	Jan-26-02 08:10 AM
Old School 2GNTer 1750 posts,

#12835, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 46

Ok, I just took some pics on how to solder up the leds and how it looks installed. Ill load them up later, Im in the proces of painting my interior and Im trying not to fuk it up.

"Only Pirates Say R"
hondahater21@hotmail.com
www.geocities.com/hondahater21

Change Your own Blinker Fluid! --> http://geocities.com/changeyourblinkerfluid/

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

HondaHater21	Jan-26-02 02:23 PM
Old School 2GNTer 1750 posts,

#12836, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 47

I just posted the write-up and Im about to order 15 leds, how does that sound?

"Only Pirates Say R"
hondahater21@hotmail.com
www.geocities.com/hondahater21

Change Your own Blinker Fluid! --> http://geocities.com/changeyourblinkerfluid/

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

jeffgsu	Jan-26-02 05:48 PM
Member since Jan 23rd 2002 292 posts,

#12837, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 48

where are you getting your led's from?
jeff

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

HondaHater21	Jan-27-02 10:58 AM
Old School 2GNTer 1750 posts,

#12838, "RE: I changed my HVAC lights! Too easy"
In response to Reply # 49

Im gana order them from radioshack.com, they give you a dicount if you order alot

"Only Pirates Say R"
hondahater21@hotmail.com
www.geocities.com/hondahater21

Change Your own Blinker Fluid! --> http://geocities.com/changeyourblinkerfluid/

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Top

2GNT Technical

Interior/Exterior

topic #12788

Previous topic | Next topic

Generated in 0.082 seconds, executing 114 queries.