Ive got a 98 auto i was trying to insstall the new guages i got i was having a problem with it i didnt know where to run the wires.... do i just rip the old guages off and lay the new ones down. i got everything ripped out and have pannels laying around so just need some help if anyone could.... could someone please help me out with a write up on it? I looked around but couldnt find anything helping me.
thanks a lot

Dino

For Sale: 98 3Piece Spoiler email me
www.wrestlewarehouse.com

Whoa.. Another Dino..

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

what type of gauges? are you talking about indiglo gauge OVERLAYS? You just put them over the stock gauge faces. Then you should have a power wire and a ground. power goes to a power source that turns on when your gauge lights normally turn on and ground ... goes to a ground.

-"Easy Mac"
05 Mazda RX-8 (RR8 #88)
99 Eclipse RS 398whp & 372lb-ft

my reverse indiglos, slipped over the needles, and the side ones I think had small screws to hold them. I also used a folded piece of paper and applied clear epoxy on the back to hold them down flat so the needles wouldn't get caught. I had to get an extra piece of wire, I ran mine thru the firewal , drilled a small hole in my fuse box cover, and ran the wire into my tail lamp fuse. I think I grounded to the - battery cable.

i have the indiglo guages.....do i place them over or rip the old ones off. there are 2 wires as you said on with a plug and then the wire as you said that might be the ground wire??? how do i place them to go to the back of the pannel and to the ground?

thanks


Dino

For Sale: 98 3Piece Spoiler email me
www.wrestlewarehouse.com

looks like someone is over there head
help is on the way
www.turbogs.com/indiglo.htm

AFX/UDP,AEM,AF/X 55mm TB,50 shot of NOS,Glenn's short shifter,17" tantrum,prokit KYB AGX,JL stealthbox sony headunit,audiobahn amp,M3 style mirrors,Blue leds,yellow fogs,reverse ind,w

First off you want to place them over. Like 9d9 said the small side ones have little screws hold them down so you'll take the screw out put the indiglos one and them screw them down. You won't actually take anything off. The tach and speedo just slip them over the needle. You'll have to take apart your instrument cluster to do all this.

As for the wiring? How many wires do you have? I had 2 (I don't have my indiglo's anymore) wires. One black, one red. I didn't run it all the way to the fuse box like 9d9 did. I took the red wire (power) and tapped the wire that runs the lights for the stock lighting in the instrument cluster ... if you look under the dash there will be a big clump of wires in wire loom. I can't remember the exact color of it but it was either blue/white strip or green/white stripe. Tap the power wire into that. Then the group wire, put a connector on it and find a bolt that is grounded well and attach it there.

-"Easy Mac"
05 Mazda RX-8 (RR8 #88)
99 Eclipse RS 398whp & 372lb-ft

i think the parking light wire ur talking of is the white and green wire.. ijust ran power into my fuse box near the rest pedal
and grounded it down there too.. then u should have them lil clips that connect to the guages... i drilled 2 small holes so i could slide the wires down under the steering wheel
now they dont work i have to call AC and askfor new ones.. if not i will tell all not to buy...the first time i got them they sent no button so i was mad too.. and they sent one..

they are like 4 months old..

I love dino and 2gnt. ####ers (my word) bliz stole it but i let him borrow it

i was wondering where the 3 wires go?????

For Sale: 98 3Piece Spoiler email me
www.wrestlewarehouse.com