#10728, "More Pics of Gunmetal Rudora Eclipse, Custom Wing"
Hey all, here are some more pics of the gunmetal eclipse with full Rudora kit and the new custom wing that is now going into production. The wing fits flush with the car. There are also a lot more pics of other cars, and more pics of the gunmetal eclipse, at http://www.importvenom.com under Feature Cars -> Additional Pictures -> Index Page 2.
I also have some pics of other cars at the body shop, such as a nice accord with skyline headlights, and altezza tails, and TWO 18" subs at http://www.importvenom.com under Feature Cars->Additional Pics.
________________________________________
2004 WRX - WR Blue Pearl 1997 Eclipse GS - Royal Sapphire Pearl
#10730, "RE: More Pics of Gunmetal Rudora Eclipse, Custom Wing" In response to Reply # 1
It's a gunmetal nissan color. And he switched from skunk2 to stock because daily driving was too low. His car rubs all the time from what he told me...
________________________________________
2004 WRX - WR Blue Pearl 1997 Eclipse GS - Royal Sapphire Pearl
#10734, "RE: More Pics of Gunmetal Rudora Eclipse, Custom Wing" In response to Reply # 4
Yup, it only bolts down to the center of the trunk, not the sides. But you need to put some padding on the sides to aboid it denting the rear quarter panels when you slam down your trunk.
________________________________________
2004 WRX - WR Blue Pearl 1997 Eclipse GS - Royal Sapphire Pearl
#10739, "RE: More Pics of Gunmetal Rudora Eclipse, Custom Wing" In response to Reply # 10
How does the wing mount to the car? same middle point as a stock RS 3 piece wing? Also would i need to cover my existing holes for the 2 parts to to the sides of the trunk? or are they covered and could wait until i had more time to get that done? Love the wing and am making a serious consideration at purchasing one from you... how much would shipping be to nor-cal?
1998 Mitsubishi Eclipse RS
Makin' It Fast & Stable: Sportline Springs Hotshots 4:1 Header GReddy Cat-Back Exhaust AEM Cold Air Intake Tenzo R Front Upper, Rear Upper and Lower Strut Bars Toyo T1-S 245/45 Tires on 17" Concept Neeper Synchro Wheels
#10740, "RE: More Pics of Gunmetal Rudora Eclipse, Custom Wing" In response to Reply # 11
Hey, you just need to drill holes on the trunk (hatch) near the edges (where the existing holes are). However, the wing will expose one or two of the holes left from the side pieces of the stock 3 piece wing. You can put stickers over the holes temporarily (or some people do that permanently). Shipping to norcal would probably be around 50 bucks. Email me at eclipse804@hotmail.com. I'll be out of town for a few days so I might not get back to you for a bit.
________________________________________
2004 WRX - WR Blue Pearl 1997 Eclipse GS - Royal Sapphire Pearl