Well I was thinking of painting my stock rims to give my car a new look. I would be better if I could get other rims but there no $$ for it. I was thinking maybe doing a flat black with a silver or charcoal gray lip. I really want to see what other have done with theirs.

heres a pic of what rims I have...

Status- Need to do break-in...



Try not to challenge me, I'd rather tie up than lose. Either way you NEVER WIN.... - Me..

Nobody has painted their stock wheels?

Status- Need to do break-in...



Try not to challenge me, I'd rather tie up than lose. Either way you NEVER WIN.... - Me..

I'll be painting my evo 8 wheels later but I haven't done it yet

Erik P.
Official 2GNT thread Hijacker
Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be...
All we know is, He's not The Stig... But he is The Stig's Spartan cousin!

Well post some pics to see how that goes, I wanna see a few colors and styles first to decide what I will do with mine.

Status- Need to do break-in...



Try not to challenge me, I'd rather tie up than lose. Either way you NEVER WIN.... - Me..

I have my stock 14"'s on that I painted black and left a silver rim,
its starting to chip tho...probably because I didn't use a clear coat on top, which is what I need to redo one of these weekends.

Damn that pic is huge!

could you post one of how they look on the car, but a small pic please!

And I am looking forward to see that how to on the paint for the wheels!

Status- Need to do break-in...



Try not to challenge me, I'd rather tie up than lose. Either way you NEVER WIN.... - Me..

Erik P.
Official 2GNT thread Hijacker
Some say that he's driven over more Covenant than he's shot, and that his grenades aren't where you'd expect them to be...
All we know is, He's not The Stig... But he is The Stig's Spartan cousin!

Here's mine, nothing fancy just black caliper paint w/ clear coat on stock 16" allow ninja wheels:

/>

'95 GS w/ t3/t4b
FMIC, diy piping & RFL BOV
MS2-Extra Fuel&Spark
50 lb/hr Holley injectors w/ 1:1 RRFPR
JE 8.8:1 dish w/ Hastings Rings
Eagle Rods w/ ARP bolts
ARP Head studs
Mild port/polish head
3" custom DP/cat section, 3" PIT catback
dual MBC - 12 psi / 20psi

yea, sorry about that size haha, heres a pic i just took with them on my sweet baby

Boostin' in an 99' RS-T.

Built, not bought.

Coming soon: Black on Black Suede Interior, In-Dash Media Unit

Looks good guys!

So how did you do it? did you sand off the old paint or used paint remover, etc..

Want to try this on my car to get a different look..

Status- Need to do break-in...



Try not to challenge me, I'd rather tie up than lose. Either way you NEVER WIN.... - Me..

I just cleaned it really well, there's only a clear coat on it as is I believe. Taped off the outer ring and had at it. Did like 3 or 4 coats, then a couple clear coat to help with rock chips. Hadn't had any of the rim black flake/chip yet, just the lug nuts that I only half-assed with regular black spray bomb.

/>

'95 GS w/ t3/t4b
FMIC, diy piping & RFL BOV
MS2-Extra Fuel&Spark
50 lb/hr Holley injectors w/ 1:1 RRFPR
JE 8.8:1 dish w/ Hastings Rings
Eagle Rods w/ ARP bolts
ARP Head studs
Mild port/polish head
3" custom DP/cat section, 3" PIT catback
dual MBC - 12 psi / 20psi

Ok, thanxs for the info..

Status- Need to do break-in...



Try not to challenge me, I'd rather tie up than lose. Either way you NEVER WIN.... - Me..

black rims are overrated. i feel they just dull the look of the car