Hey, im trying to get the front fender off and i cant get it. I think i have all of the screws but it wont really move at all. Do i have to take off the splash shield to get at any bolts? thanks.
Thank you mobil one for rust proofing my driveway.
#100244, "RE: how to take front fender off?" In response to Reply # 0 Dec-10-07 10:00 AM by Nightfall
Remove 2 bolts between the fender and bumper, 4 along the top, open the door and there's one towards the top between the door and body, 1 you remove from inside the engine bay beside the turn signal bulb, 2 on the lower front side of the fender (remove sideskirt end cap if you have them), 2 under the very bottom and 3 right under the fender lip holding on the splash gaurd.
#100314, "RE: how to take front fender off?" In response to Reply # 0
Originally posted by Hedge Hey, im trying to get the front fender off and i cant get it. I think i have all of the screws but it wont really move at all. Do i have to take off the splash shield to get at any bolts? thanks.
You still have remove your tire though, and you can keep the splashshield attached to your car. let it hang there while you take the fender. I have do this to mine its lil' bent from a minor fender bender with old lady. When this winter breaks I'm replcing it and installing my Vis hood. Just be careful when you remove the top 10mm bolts of your fender they will snap the heads if they where over torqued/rusted. This happend to me so I know. My bad if this is an old thread.
______________________________________ ______________________________________ "Don't fear the weapon, fear the soul of the warrior using it." "My CEL only goes off when i remove my battery."
Best sum up of working on a 2GNT DR1665- "#5. Spike that motherfucker on the garage floor and grab a beer. You deserve it."
Ahhhh Priceless . . . eclipse982nrRST "its actually lightish red" RoninEclipse2G "yeah, they already have a color for that... it's called PINK"
Search
Printer-friendly copy
1 User in Chat
