im still on the stock clutch and have a leaky slave master cylinder. the problem is when i shift hard and fast from 2-3 ocassionally the shift will go into 3rd but the clutch pedal will stay depressed to the floor, but the shifter stays in 3rd and the engine revs like its in neutral. im pretty sure its the clutch going bad on me but why does the pedal stay compressed on the floor. usually after a tap it goes back to normal

______________________________________

11.65 @ 115

replace your slave and master cylinder and the problem will go away. I had this same issue.

Just to be on the safe side i would start doing some CW test.