Does it matter wich way the slots go??

- No Purchase Neccesary. Details Inside.

yes, slotted rotors are typically designed to be put on the left or right side of the car

"Tutto fa brodo."

Todd Scungio
98 RS
15.173 @ 90.70 MPH

And also a 2011 Ralliart

I mean. Are they directional??

- No Purchase Neccesary. Details Inside.

Yes they are. If you put them on wrong, they will not serve their purpose. It kinda hard to actually tell you how they go, but if you look for pics online or in a magazine, you will notice they all face the same direction. They also go the same way as cross drilling. I'll try and tell you though. If you are looking at the right side one, the slott wether straight or curved will slope down from the upper left to bottom right....if that makes any sense to you. Just look for some pics, you'll see.

http://www.cardomain.com/ride/3130861

I called AEM and they said it goes from the inside of the rotor to the out side. I stll get the same sound as if they were on backwards. I'll have that though right? The AEM big rotors look awesome.

- No Purchase Neccesary. Details Inside.

Looking at the left side of the car - If you put your finger in the center, and move radially outwards, the slot will rotate clockwise. That's the best I can explain it. doing the same on the right, it should be counterclockwise...

2gnt: '99 RS-T, killed by a toyota, pending rebuild...
Daily: Volt
Daily #2: '99 EVG ebike- STOLEN by PEDRO

There you go, that's a good way to explain it. That's what I was trying to say

http://www.cardomain.com/ride/3130861

allrighty, somebody finally gimme a star

2gnt: '99 RS-T, killed by a toyota, pending rebuild...
Daily: Volt
Daily #2: '99 EVG ebike- STOLEN by PEDRO

slots should look like they're slapping the ground not digging into it

http://www.ocaddict.com

thanks beefgg for the sig