Anybody know who makes springs for a Spyder. I know their spring rates are slightly different as the Spyders are heaver than the coupes.
Looking for roughly this height. Any info will be appreciated.



Kaiser& cyndi

-K-

Actually most vendors just use the exact same springs for the spyder. I guess you could use GSX springs since they are heavier? Are the shocks the same? I think so right?

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

GSX are different, won't work for ya. a freind of mine has a spyder and he was running a sportline setup for awhile and it sat normal.

____________________________
My $.02
95 GS

I could see the GSX parts workign for the spyder as they are of the same weight at both ends. not too sure about the Struts though.

Eitherway, thanx for all of your help. I'll write to Eibach and see wha tthey got.

kaiser

-K-

I doubt a GSX set-up would work for the Spyder because the AWD suspension is slightly different. At least as far as I know Pretty sure.

Interesting question though... but I don't think the weight would hurt the springs or struts any. We've been checking around for a new set-up for our Spyder and haven't run into any problems. Unless they list seperate springs or struts for a Spyder (or clearly say "not for Spyder), you can get just any FWD set-up.

Jen & Cody
-1995 Eagle Talon ESi
-1990 Eagle Talon TSi AWD
-1997 Mitsubishi Eclipse Spyder GS-T
-1991 Mitsubishi Eclipse GSX
-1991 Mitsubishi Eclipse GSX

_________________________________________
1997 Mitsubishi Eclipse Spyder GS-T
1995 Eagle Talon Esi
1990 Eagle Talon TSi AWD
1991 Mitsubishi Eclipse GSX
1991 Mitsubishi Eclipse GSX

Thanx Jen. Cyndi told me that you guy's Spyder gernaded from CW. Is it up and running yet?

What suspension set up are you guys running on yours? We don't want it too low as it is a daily driven street car and blvd cruiser.

Kaiser

-K-

My friend has a GS spyder. He got sprint springs. They make a spyder-specific application. I think it was a 2" drop tho. Maybe intrax too? I am not really sure if eibach makes a spyder kit. Sorry, I dunno much. I do know sprint makes a kit tho.

here's a pic of his car. GS spyder with 18" rims.

Ya, it crankwalked 11 days after we bought it. We brought it to Mitsubishi, they confirmed it and fixed it under warranty. I was very satisfied with them. They said it would take 2 to 3 weeks, but they called us after 8 days to pick it up. They also called us almost everyday to let us know what they are doing! Wish every Satan was like that

Since then we haven't had a problem with it.

We are going to get some H&R srings. We have the Race ones on the '95 but don't want to go quite that low with the Spyder so we are thinking about H&Rs sport springs. Struts won't be an issue for a while since it has relatively low mileage.

Jen & Cody
-1995 Eagle Talon ESi
-1990 Eagle Talon TSi AWD
-1997 Mitsubishi Eclipse Spyder GS-T
-1991 Mitsubishi Eclipse GSX
-1991 Mitsubishi Eclipse GSX

_________________________________________
1997 Mitsubishi Eclipse Spyder GS-T
1995 Eagle Talon Esi
1990 Eagle Talon TSi AWD
1991 Mitsubishi Eclipse GSX
1991 Mitsubishi Eclipse GSX

I'm not sure the spyder's rear end weighs more than a coupe. That rear hatch isn't very light...

____________________________
My $.02
95 GS

yeah I was lookign at the H&R set up as well. WE'll see.

thanx for your help jen.

kaiser

-K-