i'm tired of my freakin brakes squeekin all the time. i just replaced the pads and its in the front. is there something to do to stop them from squeekin.

http://home.bendcable.com/optimuspeterson <<<<HRC Stage 2 and Star Instructions
95 Eclipse - SOLD | 93 BMW 318is - SOLD | 2000 S-10 Extreme on 20's - SOLD
93 Toyota/shaved/bagged/body dropped - SOLD | 97 GSX - SOLD
2006 Scion tC

try putting on some anti-squeek compound on the pads. They sell that a any part store. Or maybe try bleeding the brakes.

Ian | SoCal | Former 2GNT owner |
2GNT mods & pics: www.go.to/dsmdomination |
email: icjeclipse@earthlink.net |

why would bleeding the brakes help?

http://home.bendcable.com/optimuspeterson <<<<HRC Stage 2 and Star Instructions
95 Eclipse - SOLD | 93 BMW 318is - SOLD | 2000 S-10 Extreme on 20's - SOLD
93 Toyota/shaved/bagged/body dropped - SOLD | 97 GSX - SOLD
2006 Scion tC

What I do to get rid of the squeak is put on the compound (sticky stuff) like "Optimus..." said BUT before I put the pads back on I sand them down I little to make them smooth and try to clean the discs to get rid of brake dust. Also make sure you're dics are even and don't have small cuts, ridges anywhere. That usually takes care of the squeakin for a couple of thousand miles.

1995 GS with 147K miles, Injen Intake, Pacesetter Catback, Projector headlamps, G2 altezzas, Clear Sidemarkers, Tokico Blues and Eibach Pro's, 18" Chrome Zeneti Milanos, 97+ front bumper

Well everytime you replace pads, you should always at least turn the rotors, or get new ones. The new pads have to wear in with the rotors at the same time, or braking problems can happen. Squeeling is one of em! Its only like 5-10 bucks or so a rotor to turn em, just do that, and might want to use new pads when you do. I have never really used that anti squeel compound stuff. I did my fronts not long ago, no compound, and no squeel. I got new pads and new rotors when i did it.

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

my rotors are new, changed them with the pads

http://home.bendcable.com/optimuspeterson <<<<HRC Stage 2 and Star Instructions
95 Eclipse - SOLD | 93 BMW 318is - SOLD | 2000 S-10 Extreme on 20's - SOLD
93 Toyota/shaved/bagged/body dropped - SOLD | 97 GSX - SOLD
2006 Scion tC

It also depends on what kind of pads you got. The real hard performance brake pads such as metalic ones, or even carbon fiber, will squeel some. Usually semi-metalic pads will not squeel.

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)