I have a 95 Eagle Talon Esi (non-a.b.s) it is four disc brakes...I recently changed rotors and pads and a few calipers because they were shot when i bought the car abut a year ago...i changed the pads to ceramic duralast gold...and when you hit the brake.. now the car dont have the stoping power as it use to have...A freind of mind to it to school with him (to a colledge automotive brakes class) ,it stopped pretty good but the car stalled out a few times if you hit the brakes to hard...but now its not doing that anymore...you can fully press the brakes and and it will stop but not well ( it wont skid or squell the tires when fully braked) ...Is there a trick on the brake system on this car ?(i know when u bleed the brakes its a diagnal bleed proscess i found this out after bleeding them 3 times lol)

New brakes won't have the stopping power old brakes do until they have been used a bit. You are sure you bled it right then? If so, don't worry about it, if you are stopping in time, and have decent stopping power, then you should be good to go.

Jason|1997 Eclipse RS

I contributed to the wiki!

happy p'ple