I've searched and read every article and write up I could find. Some mention being able to use avenger or seabring brakes for our rear disc conversion, but none of them clearly stipulate if we can use the backing plate from those cars. I'd be able to find an avenger or seabring at the junk yard alot easier than a GS or GS-t. Thanks

avenger/sebring brake parts are IDENTICAL to eclipse GS/RS parts.

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

Yes, completely the same.


If you follow the tech topic on my website you can save youself the hassle of swapping out all the e-brake cables assemblies. You do a slight mod to the backing plates and use the old drum e-brake cables.

NOTE: When you get the parts from the junk yard be sure to get all the e-brake shoes, springs, keepers, etc. that go under the drum. There is no need to pull all those parts out when you remove and install the backing plates so that way none will get lost. If you go to a yard where they won't let you pull the parts yourself be sure the yard guy understands this or you'll be at the dealer looking for parts later.

http://www.rcaz.com/rcaz/sub%20indexes/drum_to_disc/index.htm

get them whole i got a set from egay missing a spring and 3 inch bracket 80 bucks at satan
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=019&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=290062137099&rd=1,1

there you go i was looking a these as extra parts I paid 220 for mine.

We will build you bigger and stronger


Wake up and drive my ass... More like wake up and fix it.

If the opposite of Pro is Con
then the opposite of Progress is Congress