When I put the 19mm front swaybar I used ES bushings and the driver side one squeaks like hell. I added the supplied grease again and again and it always comes back. When I take the bushing out there's NO grease on it whatsoever!!! Is there some better grease or should I just go back to rubber I need to fix this before I try to sell the car.

1993 Eagle Talon TSI AWD: balance shafts, cruise & AC removed; 16psi, Dejon intake & UICP, ported 14b, EVOIII mani, ported 2G O2 housing, 2.5" Buschur dp to 3" Thermal exhaust, datalogger, front strut brace, prothane motor mounts

1995 Eclipse RS U-Boot; Tokico Illuminas, GSX front brakes, ST front swaybar, short shifter, CAI with K&N filter, rear disks and swaybar, front upper and rear lower strut braces, beater exterior

I've had the whole ES kit on my car for over 2 years now. I use this stuff I get from work called DC 111, it works great.

http://www.ellsworth.com/display/productdetail.html?productid=319&Tab=Products

thanks!

1993 Eagle Talon TSI AWD: balance shafts, cruise & AC removed; 16psi, Dejon intake & UICP, ported 14b, EVOIII mani, ported 2G O2 housing, 2.5" Buschur dp to 3" Thermal exhaust, datalogger, front strut brace, prothane motor mounts

1995 Eclipse RS U-Boot; Tokico Illuminas, GSX front brakes, ST front swaybar, short shifter, CAI with K&N filter, rear disks and swaybar, front upper and rear lower strut braces, beater exterior