I just got my ingalls camber kit today and I know where all the parts go, but I have no idea how to make all the right adjustments on them. I have the bracket things for the back but will I need to buy longer bolts now due to the washers that will be added? And why are they holes in different areas on the washers. How do i know what ones go where?? Please help me! Thanks in advance!

Pictures will be needed of what you got. I have the ingalls kit and each washer is designed to add "X" amount of camber for the rear. The front is just a nut you tighten and loosen to adjust when on a alignment machine. Sounds liek you have a diffrently designed kit.

if you bought a front and rear kit just take the car in to get an alignment and they will install all the parts for you.
you can only guess anyways they will have to adjust it when you get there so just let them do it and be done

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

Well I've seen this kit that I have more than just mine online. I'm just confused about the washers. Its just a washer with the hole in the middle, accept that hole is in different places on the washer and the hole is acutally shaped like a D, not a circle. There are some washers with holes in the middle and other placed differently. Do you think that these are only for the back? The front kit is just like the b or d shaped things with the bolt on each sides. Do any wahsers go up front or do you just adjust it with the bolts? Thanks!!

DUDE, take the car to the alignment shop, give them the parts, come back a couple hours, pick up car all aligned.
sure you can install it, BUT like I said above they will have to change it all to align it so why do the same work twice.

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

------------------------------------------------
98 ESi
95 GS