I've searched and searched and searched for this. Does any one know how much the new rear knuckle part is from satan? I have the energy suspension master bushing kit but all the stupid shops here can't install it and I'm getting really sick of the clunking everytime that I hit a bump because both knuckle bushings are wasted. TIA!
Jason '11 Ford Mustang GT/CS '11 Ford Mustang V6 6-Speed (SOLD) '04 Nissan 350z Touring (SOLD) '95 Turbo Eclipse GS (SOLD and will be missed) '90 Talon TSi AWD (SOLD)
#22926, "RE: Rear knuckle replacement" In response to Reply # 0
rear knuckle is like 200+ from satan. I have a set of them if you need one. look up partznet.com they list them. If you still need one send me a pm i would sell one for 20.00; 30.00 shipped.
#22927, "RE: Rear knuckle replacement" In response to Reply # 1
$212.09ea and they weigh a ton. Looking at my receipt here the part #s are MR333869 and MR333870 but doesn't say which # is driver's side and which is pass.
#22928, "RE: Rear knuckle replacement" In response to Reply # 1 Mar-10-04 03:38 PM by sonikbewm
Originally posted by Star Turbo Talon rear knuckle is like 200+ from satan. I have a set of them if you need one. look up partznet.com they list them. If you still need one send me a pm i would sell one for 20.00; 30.00 shipped. Terry
You have the entire rear knuckle assembly with the bushings that you would sell for $30.00 shipped? I really need to replace both sides badly.
SpreadEagle: Thanks a lot for those part numbers!
Jason '11 Ford Mustang GT/CS '11 Ford Mustang V6 6-Speed (SOLD) '04 Nissan 350z Touring (SOLD) '95 Turbo Eclipse GS (SOLD and will be missed) '90 Talon TSi AWD (SOLD)
#22934, "RE: Rear knuckle replacement" In response to Reply # 3
Yes i have a pair i would sell for 30.00 each. let me chck shipping tomarrow to give you an accurate price. I am looking for 20.00 + shipping on each.
What is your zip code year make and model of car ABS yes or no
Yes they are the knuckles with the pressed bushings in them on the bottom front and the middle and rear bottom are bolt ins. top is a bolt in as well or shall we say ball joint bolt in.
I really have no use for them, mine are fine. they are off a car i cut up and what can i say...i am a packrat.
#22935, "RE: Rear knuckle replacement" In response to Reply # 4
you know what i want to chk part numbers because concelli states that there are two types made a 95-96 and a 97-99. Now i really doubt that but i will send you the casted part number on the ones i have and you can compare with the part numbers on yours. the ones i have have a bushing on top, a bushing on bottom front and middle, and the bottom rear have a ball joint.
According to concelli the hub bearing is the same for all years except for abs yes or no, all the arms are the same. if there are two diffenet ones i have no idea why.
#22936, "RE: Rear knuckle replacement" In response to Reply # 5
Oh shit, sorry if I messed you guys up, I wasn't even thinking but my car is ABS, they might be different part #s. Good lookin out Star Turbo Talon, sorry about that sonikbewm, I was just tryin to help.
#22940, "RE: Rear knuckle replacement" In response to Reply # 6 Mar-11-04 03:47 AM by sonikbewm
Star Turbo Talon: My zip code is 67005. My car is a 1995 Eclipse GS and no it does not have ABS. I'll check those part numbers on mine and see if they match the part numbers that you send me. $20.00 each plus shipping sounds great if they match. How are the bushings on the 2 parts?
Thanks a lot for your help guys!
Jason '11 Ford Mustang GT/CS '11 Ford Mustang V6 6-Speed (SOLD) '04 Nissan 350z Touring (SOLD) '95 Turbo Eclipse GS (SOLD and will be missed) '90 Talon TSi AWD (SOLD)
#22952, "RE: Rear knuckle replacement" In response to Reply # 7
Ok i found the difference.....no mount for the ABS sensor. A 95 gs these will fit no problem. I didnt get the part number off the bottom but its pretty small and i dont think you could read your with the knuckle on the car. At any rate these are off a 95 gs so there is no problem.
Figuring they weight no more than 30lbs, if i ship ups ground it will cost 16.30 for shipping so thats 56.30 if you want both. shipping them together saves some cash fo you.
Let me know
oh and the bushings look nice and solid, they are not cracking at all or have any damage.
#22960, "RE: Rear knuckle replacement" In response to Reply # 8 Mar-11-04 01:57 PM by sonikbewm
Sure. I'll take them both! Do you want me to send the money with paypal or some way else?
Jason '11 Ford Mustang GT/CS '11 Ford Mustang V6 6-Speed (SOLD) '04 Nissan 350z Touring (SOLD) '95 Turbo Eclipse GS (SOLD and will be missed) '90 Talon TSi AWD (SOLD)
#22967, "RE: Rear knuckle replacement" In response to Reply # 10
Alright man, I just sent the money. I gave you my shops address instead of my house address because someone is always there to receive things from UPS and fedex. It isn't a confirmed address on paypal though, so I figured I would let you know. Thanks a lot man! I'll let you know when I get them.
Jason '11 Ford Mustang GT/CS '11 Ford Mustang V6 6-Speed (SOLD) '04 Nissan 350z Touring (SOLD) '95 Turbo Eclipse GS (SOLD and will be missed) '90 Talon TSi AWD (SOLD)
Search
Printer-friendly copy
1 User in Chat
