Well......... I bought some cheap a** lugs from Advanced Auto (I think). Over the year or so I've had them: they silver chrome (see also PAINT!) has chipped off, they have turned orange from rust, and now even the inside threads C'ms 2 have bent over as they just slide over the studs! I mean WTF?!? Talk about getting what U pay 4, man this p*sses me off!

Anyways, I need 2 replace them yet again w/out repeating the same mistake 2x. Pleaz pleaz pleaz help me out, no trial & error shi... crap. Also, keep in mind, I need CONICAL lugs as my 3rd Gen RX-7 Rims mandate this!

Thanx as always!
- J

- J

Try NAPA, and just give them the make/model info for an RX-7 and they should give you what you need. Also if you want some fancier once try

http://store.summitracing.com/section.asp?d=17&s=158

---

2012 2500HD LML

i have the "tuner style" lug nuts from http://www.rim1.com i like them a lot.

2016 WRX STi Limited (current)
2001 A4 1.8tqms (donated)
1991 GVR4 #1933 (sold)
old.dsmregistry.com/detail.php?carid=218 (dismantled)

I think gorilla lugs are the best, and they are pretty inexpensive. (They have the largest selection of lug nuts than any other company.)

I bought mine from www.jcwhitney.com for less than $40 shipped.

Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

Thanx 4 your replies guys, hope U all had a good Christmas & New Years! Anyways, here's what I'm looking @...

http://store.summitracing.com/partdetail.asp?part=MCG%2D65557

"For use with 5-lug wheels, M12 x 1.5 thread, 13/16 in. hex size, with locks and valve stems, chrome plated, SplineDrive lug nut kit"

I'm pretty sure our studs R 1.5", but I don't remember about the threads. Is M12 right? Oh yeah, they're $72.95 + shipping. They're rather Xpensive, but is prob what I'm looking 4.

I've gotta friend who got his @ NAPA & said they were fine, just got a lil rusty. Not wanting 2 have 2 deal w/ again.

Lemme know & Thanx!
- J

- J

Bumpity

- J

Yeah, our lugs are 1.5x12mm

____________________________________________________
four nails four corners four riders and four horses

Thanx, I wasn't sure... I'm assuming M12 = 12mm. Anyways, thanx again!

- J

- J

Yea man, i know wat u mean, I got mine from Les Swab, not sure if they have that over where u live, but usually they have wat ure looking for. Try them and see what they say about non rusting lug nuts..they are highly recommended where i live. so i would try them later...
Andre

Injen ShortRam.OBX-R Muffler.2.5inch catback.Tokico HP blues.Tokico 1.7in Drop.15%tint.17in TenzoR Apex-5.Brushed Alluminum Dash.Reverse Gauges.Blitz rear,lowskirts(not installed)