I dont have pic yet sorry but will try. I takes the top wishbone control arm, the 1 that goes around the strut, and u remove the part which bolts to the strut tower by removing 4 bolts. It came with 4 of them. any ideas.

Sounds to me like the rear camber kit. It has 2 brackets per wishbone to work. Without pics thats the best I can do.

yeah that is what I think too. Is there some way to tell who made it?
Do I need this with prokits? Or can I just use the $15 one, instead?

I made one myself, I got 8 grade 8 bolts about 1/4" longer and some thick washers with the same size holes. The washers should be about 1 1/4" dia.