#21148, "do i need a special tool to push out the lower ball joints"
from the stearing knuckle so that i can remove the axels from the tranny?
USED TO HAVE...Everything you wish you had, and then some...
You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)
#21149, "RE: do i need a special tool to push out the lower ball joints" In response to Reply # 0
Why would you remove the ball joint to remove the axles? that's the hard way.
Unbolt the lower control arm from the body. Unbolt the trailing arm from the body. Unbolt the strut fork from the lower control arm. Move the suspension out of the way, and pry on the metal inner CV housing to break the axle snapring free. Beat the castle nut off the axle. end while someone holds the brakes. beat the axle out of the hub.
What's the problem?
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
Search
Printer-friendly copy
3 Users in Chat
