Does anyone have a factory part list for the parts needed to do the swap? I can't find some of the parts around me, and was just going to get them through the dealership (through Bob Kise).
Thanks for the info.

"Anyone who has never made a mistake has never tried anything new."
-Albert Einstein

That would be a very expensive choice. Contact mitsubishi specific salvage yards or have a local salvage yard to a search to find what you need.

97 RS(PTE SC-61, Built Long Block, Electromotive Tec 3)It's Here!

which parts do you need as I might be able to get them. The parts you need are the rotors, calipers, hubs and ebrake cables, and the brake lines. I believe that is it.

i was able to do some custom work to the mount on the disk brakes to make the drum brake (e-brake) line to work.....also i have a caliper i could sell you....i got three of them when i was at the junkyard....let me know if you need it, not sure what side it is, but ill check later if you want it
doug

14b custom turbo kit, modified starion front mount, 9.6:1 JE pistons/Eagle rods....running 12psi
screw flanders

theres a section on the main page that has instructions for the conversion.

myspace.com/coastiecobb

www.se.dsm.org under the how-to section has a writeup that tells you how to modify the drum brake ebrake lines so you dont need the ones of a rear disc brake car, not sure what all is involved tho. here are the pictures i took when i did mine this weekend.

ww.geocities.com/gorkoracing/rearconv.html