#2078, "Anyone familiar with Brembro rotors-slotted and drilled????"
97 RS Cheap, Matrix Short ram intake Indiglos (who dosen't?) Front & Rear upper strut bars Rear lower Stablizer bar Front RRE lower Tie bar (soon, i hope) Eibach Sportline = 1.6in drop 17" Focal Type 161's Z-rated Proxes tires Stock shifter shortened 1.25in Custom made shift plate(no more shift boot) Carbon fiber Altezzas GS-T exhaust Plus, all the little changes...
USED TO HAVE...Everything you wish you had, and then some...
You are somebody special Tim, you matter! - from the admins (but nobody likes you, because your username is just like that other guy's, and you whine a lot)
#2079, "KVR Performance Rotors use Brembo blanks" In response to Reply # 0
They crossdrill/slot the rotors and then cad plate them if you get that option. You could also save a few $ and just paint the rotors with engine high temp paint(ceramic silver color looks good). Let the rotors dry a overnight to ensure it is completely dry and this way the paint will not stick to your rim. Two light coats will do, any more and the paint will stick to your rim.
I paid for the silver cad plating option and am happy with the results and corrosion protection it provides. No external rust!
Not to throw you a sales pitch, but S&A Motorsports(501-450-6333) is a dealer and can make you a better price than cyberauto. The parts can be drop shipped directly from the manufacturer.
Injen CAI w/ K&N Breather filters, 55mm TB, FU/RU/RL STBs, Red silicone hose kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs
And in my Room: Rear disc brake conversion kit, SS Brake Lines, GS-T Muffler, Intake manifold 4 porting, Energy Suspension Motor Mount Inserts. RRE FL Tie Bar(Well Almost), TSW Blade 17x7.5 (need tires)
Firefly: Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.
#2081, "RE: KVR Performance Rotors use Brembo blanks" In response to Reply # 2
Be careful with cross-drilled rotors. I had a pair of Brembos on my eclipse with some aftermarket pads. Well the enividable happened, they cracked on me. They make nice paper wieghts though. If i werent doing a custom brake set-up now, i'd just get the AEM rotors. just my .02
Injen CAI w/ K&N Breather filters, 55mm TB, FU/RU/RL STBs, Red silicone hose kit, 8.5mm Magnecor Wires, Bosch Rapidfire Plugs
And in my Room: Rear disc brake conversion kit, SS Brake Lines, GS-T Muffler, Intake manifold 4 porting, Energy Suspension Motor Mount Inserts. RRE FL Tie Bar(Well Almost), TSW Blade 17x7.5 (need tires)
Firefly: Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.
#2084, "That is the point" In response to Reply # 5
After a few brake applications, the paint is gone from the surface and all that is left(everywhere the pad does not touch. is a nice silver/black/red/orange/purple finish. I suggest doing your calipers while you are at it. Engine enamel sticks real well and will dry in a few minutes on the them. I use rags to cover every place in the wheel well that I do not want a bit of over spray on.
Search
Printer-friendly copy
0 Users in Chat
