BACKGROUND INFO: I'm turning my baby back into a street car from a strip-only car. I've only put 49 miles on it within the last 12 months. During that time, I rebuilt the entire engine and suspension. The main front suspension crossmember was replaced because it was bent and a set of H&R Race Springs went on with Tokico Blue struts. I also added front & rear strut tower bars and Ingall's exteme camber kit. She sits about an inch off the ground and is in perfect alignment. I have no power steering.

PROBLEM: When the front suspension compresses or expands (bumps or braking), it creeks and moans like hell. The sound seems to be coming from around the floorboards while I'm in the car.

QUESTION: What the hell is it? Any ideas?

bizzump... think a missing crossmember bolt could cause it? It seems to only be on the passenger side and I now recall leaving a bolt out. Guess I'll give that a try.

no, im pretty sure your ball joint is going out...mine did that before i replaced it.

2003 Acura RSX Type-S
15.042 @ 93.06
Devon
Creator of one of the longest and most controversial posts in 2gnt history...
http://forums.2gnt.com/dcboard.php?az=show_topic&forum=38&topic_id=112462&mesg_id=112462&page=

All control arms/ball joints/etc. have been replaced. That was actually my first thought... I can now tell that it's coming for the passenger-side only when I brake or accelerate. Any other ideas?

Possibly your camber kit hitting the inside of the fender? I have the same noice coming from my front right. I believe it is the camber anchor bolt rubbing on the inside of the fender. Just a thought.

DSM Registry Profiles:
http://www.dsmregistry.com/detail.php?carid=1410 (Eclipse)
http://www.dsmregistry.com/detail.php?carid=1411 (Talon)

my suspention creaks too. i have the blues as well. the loudness of the creaking depends on the outside tempature and how long i've been driving the car for. it's pretty weird.

i just had some suspention bushings replaced and my ball joints have had the recall peformed on them. for now i just deal with it. someday, i'll get the real 2G coilovers from Mach V.

2016 WRX STi Limited (current)
2001 A4 1.8tqms (donated)
1991 GVR4 #1933 (sold)
old.dsmregistry.com/detail.php?carid=218 (dismantled)

Check to make sure the bolts that attach sub-frame to the bottom of the car are nice and tight. Mine were loose and were making a squeeking/creeking sound whenever I hit the breaks and accelerated from a stop.

Check the suspension bushing condition, any cracking or wearing out can cause some odd noises.



15.9 @ 86.7mph

Una Salus Victus.

Mods List:
http://highlander.dsmpower.com/sig.htm

very good chance its you camber kits if they are urethane. i have the same kis and i didnt oil them properly and they squeak like hell.
-Josh

15.882@86.27

Your camber kits are pulyurethane, not rubber. Have a shop lubricate them with industrial grease, they've got some good stuff. That will fix it.

______________________________

Ryan
IRyanHester@Hotmail.com

'03 Mazda 6s