I need help choosing I camber kit. Since I'm on coilovers I'm not sure exactly how much I'm lowered... I'm guessing about 1.75 - 2 inches. At this height, the camber doesn't look WAY off, maybe 1.2 -1.5 degrees. The camber starts looking a lot worse if I go any lower though.

I found Sprint Camber Kit on eBay but 3.25 degrees seems too much. Where can I get a good kit at a good price? TIA.

___________
Black 96 GS

-Manny

i know machv.com carries camber kits for +/- 1.0 degree and kits for -1.0 to +3 degrees...for the rear. they also carry the front camber kits too, but i'm not sure what degrees they cover. Tirerack.com also carries camber kits, but i think they are for eibach springs....something to look into though. hope this helps!

2007 wrx

just a little side note, machv is kinda on the expensive side....but the camber kits def. work!

2007 wrx

www.groupbuycenter.com has Ingalls front camber kits for $120 and $130. Seemed fairly cheap to me. I'm not sure if it'd be ideal for your coils though.



Black 97 Eclipse RS a/t
Cat-back Exhaust
Nakayama CAI
Final Gear Drive Mod
AFX UDP

get an adjustable kit so you can adjust it. My ingall's camber kit is adjustable. You pretty much only need to get it for the rear cuz the front doesn't move when you lower it.

http://www.hadesomega.info -car specz and movies 95 Eclipse RS | 76' 280Z | 89' MR2 | 99 Neon | 91 Zephyr
Who sez FF can't drift?

if you don't mind the hassle can't you just do the $15 mod on the main page and add/take away washers accordingly when you change your height? it'd be pain to figure out the settings (how many washers versus which height) but it'd save ya some cash...

-marc

='95 RS 5spd Red=
Matrix CAI
A'pexi Turbo N1
Hanabi 8000k HID
SPAL Deluxe Power Windows
Nakayama GT5 17's
GSX Calipers
AEM Rotors

255 is fricken short

Ah, I should have specified I'm looking for a front camber kit. The front camber doesn't change much when you lower it, but lowering after a certain point, like 2", and it starts looking waaay off. I'm hovering right around that point, but I wanna go lower... I'm not scraping anything anymore so I guess that means I'm not low enough.

I already have the $15 rear kit using 6 washers. I'm just looking for a front one at a good price. Sprint, Ingalls, Eibach? Thanks.

___________
Black 96 GS

-Manny

I just ordered my front kit through IAPdirect.com. 120 shipped for an Ingalls with up to 1 degree of adjustment. Its 130 for the 1.25 to 3 degree one. Thats about the best price I have seen. They are the ones on groupbuycenter.com.

BTW, I am lowered 1.75 to 2" and 1.25 degrees was WAY too much for me. I am off probably about 1 degree.

just about everyone goes ingalls. i've seen alot of regret threads about not going ingalls from the begining. don't blow cash on the rear kit it's basically the same as the $15 mod.

http://www.ocaddict.com

thanks beefgg for the sig

Cool. It looks like the 1 degree Ingalls front camber kit it is. Thanks.

___________
Black 96 GS

-Manny

>don't blow cash on the rear kit it's basically the same as the $15 mod.

Um.. bs! I am not sticking 8 washers in there to get my 2 degrees of camber back. The rear is always worse than the front, and if you are lowered more than 1.75" then you should get the rear kit.

The $15 mod is for mild drops that don't screw up your camber too bad.