Has anyone ever blown a axle boot. I looked at mine today and one of them had grease coming out of it and it looked good but with like a small crack on it.

Your Garage is not worthy
For the Masterpiece you built
That only looks like it cost a Fortune
While most flaunt their cars by going fast
You show off Standing Still

It def does happen, and when it does, water can get in there and destroy your CV joint rather quickly. Dont let it go for too long, or else you will need a whole new axle. I have never replaced one, but i believe you can get new boots for them. You will have to take out the axle from the hub though, or maybe even the enire axle to replace the boot.. Not too big of a deal.

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

Just replace it before you destroy your CV Joint. dont use those speedi-boots unless you want to put one on every month. they suck.

____________________________________________________
four nails four corners four riders and four horses

I replaced one of my axle boots a couple months ago. Satan quoted me $200 to replace the boot. I ended up getting one from raxles.com it cost $13 but they have a $25 minimum order. Then I had a local garage put it on which cost $40. Saved me $135 bucks


98 Eclipse GS:
Greddy Evo
RH z5000 19's
Blitz Kit
AEM CAI

i always just replace the axle when a boot breaks. i was told that if your boot is torn and you drive on it for more than a day or so, the CV joint will go bad even if you replace the boot.

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals