how much correction did you get for the back and front camber?

if you did the 15 dollar rear mod, what size bolt/# of washers did you use?

and what about the front?
thanks
james

nobody has sportlines?

i do but havent installed them yet. i too want to know this.

I'd like to know too! I'm about to order mine. :o

Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

i have sportlines...i got the rear camber corrected with the kit from Ingalls, it was a +/- 1.0 degree. that fixed the rear real nice. hope that helps ya out. if ya want to check the kit out, www.machv.com has it and the front camber kit too(if you wanna get that done too)

*Edit* The kit came with everything that you need(bolts, etc.) and it bolted on real easy.

2007 wrx

should i get a...

0-1.5 kit
or
1.75-3.25 kit?

please someone help me

I think the 1.75 to 3 kit will be too much. How bad is your front? Im suppose to be dropped 2" and my front looks pretty good. Its the rear that is bad on mine. I would say I am off less than 1 degree in the front and maybe around 2- 2.5 in the rear? I would suspect your car is about the same.

0-1.5 kit should be all you need.

2007 wrx

i have the sportlines too. i was a retard and bought the expensive as hell camber kit off of tirerack. it works nicely though.

2016 WRX STi Limited (current)
2001 A4 1.8tqms (donated)
1991 GVR4 #1933 (sold)
old.dsmregistry.com/detail.php?carid=218 (dismantled)

NER, how off was your allignment? in degrees?

--- My 2gnt WIKI contribution ---> http://www.jamlez.com/2gnt

97 Eclipse Spyder

I have the sportlines and I needed the extreme degree kit. The regular camber kit isnt enough and you will shave tires just not as bad. As far as the rear I actually went with machined tubing(instead of 14 washers ) and made them to my settings. I however had to change the rear cuase i cut 3 coils in the front and 3 in the rear. I also lost shock travel so i extended my shock cups 1 1/2 inches. late mike

stage BIG custom mj racing turbo set up, built block.worked head,all tial components, hks evcez,spearco 992,oh yeah and a huge bottle in the trunk last run all turbo 13.8@108 no nos dyno'd at AEBS in Cali with 300+ hp to the wheels