http://www.ptuning.com/html/Item-Desc.cfm?PartNo=PTPKG2GXKIT1&MakeCode=mitsub&ModelCode=eclips&ModelYear=1995%2D1999%20All&ModelDesc=Eclipse

i want to drop my car and really don't know much about lowering, but i have 17/7.5 w/215/50 sutimoto's and i want to know if i will rub, also are those good springs/camber kit? or is it crappy. Also is that all i have to buy to lower it?

Nos Fogger Kit,AemCAI, TopFuel UDP, pacesetter cat-back, ARD bored 57mm t.b., P&P intake mani, Ractive front/rear strut bars,rear tie bar,eibach sportlines,tokico blues, morosso wires, ngkIX plugs, konig subzeros,proj. heads,gunmetal tails, rev.indiglow gauges,reverse light mod

you will not rub.
progress springs (1.7") will sag to a 2" drop, and the camber kit is not the best but it'll work for you.


97 Eclipse GS
Mods: AEM CAI, OBX muffler, Goldline springs, FU/RU STBs, Platinum plugs, Ingalls f&r camber kits, AFX UDP

I dont know much about it but It sounds like a rip. Cause you can buy the springs, all 4, for about $100. I thought there was a $15 or so chamber kit you could make in the mods section.

you can do the rear camber with washers for damn cheap. the front is trickier. I'd say shop around some more for springs. goldlines kick ass and they can be found for cheap.
97 Eclipse GS
Mods: AEM CAI, OBX muffler, Goldline springs, FU/RU STBs, Platinum plugs, Ingalls f&r camber kits, AFX UDP

I just ordered goldlines for my ride at $113.00 shipped.

Very good price and they sound like a good set of springs from what people have said. Rear camber can be done for $13.00 i believe. There's a link to it in the mods section and the front camber will have to be done seperately with another kit.

Also expect to get an alignment done afterwards.

Good luck


black 97 eclipse rs a/t
nakayama cai
cat-back exhaust
final drive gears
afx udp

i read that camber 15$ mod but i'm pretty dumb and can't understand the diagram. What all do i do and how do i know how much to add on to the bolt or whatever

Nos Fogger Kit,AemCAI, TopFuel UDP, pacesetter cat-back, ARD bored 57mm t.b., P&P intake mani, Ractive front/rear strut bars,rear tie bar,eibach sportlines,tokico blues, morosso wires, ngkIX plugs, konig subzeros,proj. heads,gunmetal tails, rev.indiglow gauges,reverse light mod

I will show you at the meet today what exactly its talking about...I did it on my car.

Chad

MODS:
3" PVC CAI, GST Muffler, Greddy 4-1 Header, AFX UDP, 55 mm bored TB, P&P Intake Manifold, Corbin intake spacer, gutted cat, Apexi S-AFC, KYB AGX Struts, Eibach Prokits, Excel TZ-10 Rims