I am on H&R Sport springs and I am gonna go get an alignment. Can the place doing the alignment fix my camber now or do I need a camber correction kit? This includes front and rear. TIA!

"Natty Ride"


http://dirty.thisfreedumb.com/

Depending on how low your drop is, you only need a camber kit for the rear. An alignment shop cannot fix camber without a camber kit (our cars weren't designed with adjustable cambers). Go to the 2gnt main page and find the link for the 15 dollar camber mod. It's really simple and it'll fix all your camber problems less then a 2" drop.

16.1 @ 87.11
http://www.virtuallyinfamous.com

ARD 57mm tb and p&p manifold, Neuspeed STB, Pro-kits, Illuminas, Injen CAI with K&N, 2.5" pacesetter catback,
AF/X UDP, Rear STB, Powerslot rotors, RRE SS Brakelines.

the front camber is adjustable a few degrees but the rear isn't adjustable

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

So all I need is the rear kit right? Does anyone know what the correct camber degrees is supposed to be for our cars? I just don't have much faith in the automotive folk in my area.

"Natty Ride"


http://dirty.thisfreedumb.com/

dsm/mitsubishi service manuals https://www.mediafire.com/folder/5k14qlaulb9s1/dsm_mitsubishi

service manuals(my whole collection) https://www.mediafire.com/folder/ac51jwwa3g1n1/automotive_manuals

You will need camber kits on both the front and rear. I am on the H&R sprorts, and my rears were out pretty good. The fronts were not as bad, but still enough to make me need a camber kit. Our cars have NO camber adjustments on them, front or rear. At most, maybe a quarter of a degree if that... If you want stock like handling, and tire wear, get camber kits on both the front and rear.

13.5 @108 MPH-2.2 60ft(stupid FWD!)
S16G @ 18 PSI/FMIC/Running on MegaSquirt II (Now with sequential
fuel injection)
My webpage: http://eclipsed4evr.home.comcast.net
-1998 Mitsubishi Eclipse RS-T- "Toy"
-1992 Plymouth Laser Turbo AWD(SOLD)
-2000 Honda CR-V(daily)

When I get a kit what degrees of correction should I go with for the front and the back with H&R Sports? Also, where can I get some camber kits?

"Natty Ride"


http://dirty.thisfreedumb.com/