So I just smashed up my 95 ESi. I basically need all the control arms, tie rods, etc for the drivers side. Are the parts on the ESi the same as the TSI/GSX? Anyone out there know of someone who has these parts for sale??? Thanks.

Rob Bain
95 Talon ESi

awd and fwd are different,

gst and esi are the same as gs and rs

You can have it cheap, fast or good. Pick any two.

If you want it cheap and fast, it's not going to be good.
If you want it cheap and good, it's not going to be fast.
If you want it good and fast, it's not going to be cheap.

All of the front arms are the same. Tie rod ends, I am not sure of. In the rear, 2 out of the 3 links are different, the upper arm is the same though. I think that if you get the crossmember and all of the arms, you can just bolt them all in.
Not sure on the last part, though.
-=B-=

Dude, Boeing called. They want their wing back.

Dark0ne95: There is a butthole on that girl that his going to feel the wrath of 23 yeras of worldwide hate.
Me: Can I put that in my sig?
Dark0ne95: GO right fucking ahead.

So who's right? Are the front arms the same or different?

Rob Bain
95 Talon ESi

Straight from CAPS (Mitsubishi parts lookup tool), front suspension part numbers...

FWD:

Lower lateral arm: MR162579
lower control arm: MR296291
upper arm: MR162803


AWD:

Lower lateral arm: MR162579
lower control arm: MR296291
Upper arm: MR162803

So there we have it. The front suspension arms are the same between a FWD and an AWD. The rear suspension bolts to the FWD, if you use an AWD fuel tank and crossmember.

-=B-=

Dude, Boeing called. They want their wing back.

Dark0ne95: There is a butthole on that girl that his going to feel the wrath of 23 yeras of worldwide hate.
Me: Can I put that in my sig?
Dark0ne95: GO right fucking ahead.

What about the hub?

Rob Bain
95 Talon ESi