2GNT.com Forums - Viewing topic - Another victim of rear camber...

Home Site Background Info & Specs Mods & Tech Info CAPS Part Reviews Donate 2GNT Stickers

Printer-friendly copy

Handling/Suspension

topic #13650

View in linear mode

Subject: "Another victim of rear camber..."

Previous topic | Next topic

HiOnPSI	Nov-24-02 08:45 AM
Member since Mar 28th 2002 2745 posts,

#13650, "Another victim of rear camber..."

Looks like I toed out after i put on the Sportlines, as I didn't really pay much attention to my rear tires until today as I was driving home and felt a thumping, so i went home and sure enough the entire inside of my rear tire was destroyed, huge hole. Threads were showing. I just bought those tires 3 months ago!! I guess that's what happens when you neglect the rear of your car emoji

Now I have one slick tire and one tire with a hole in it.
What kit do you guys suggest to correct rear camber, i searched up on it and found a few people prefer Ingall's kit but i can't find where to buy them. Anyone wanna steer me in the right direction? (pun intended).

BTW i had alignment done, my front tires are doing fine, i thought they did a 4-wheel..they might have, i'm not for sure.

Jon

1997 Eclipse RS

14.21@101mph 10/4/02

MODS: 8.8:1 JE Pistons / Eagle rods / Stage 1 Hahn turbocharger / Melling Oil Pump / Autometer 5" tach / 4 JL 12" W0 subwoofers / Clarion 230w amp / short shifter mod / GReddy EVO exhaust / custom 2 1/2" downpipe / no cat con / CM Stage 1 / 30lb Mustang injectors / TurboXS MBC / 1G SMIC / Eibach Sportline springs / KYB GR-2 struts / GReddy 52mm EGT / A'PEXi Super AFC

Jon

1997 Eclipse RS | 2001 Lexus IS300
12.671 @ 111.660 1.586 60' 5/28/04

www.haiokuracing.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Replies to this topic

RE: Another victim of rear camber..., bullox, Nov-24-02 01:45 PM, #1

RE: Another victim of rear camber..., HiOnPSI, Nov-24-02 02:42 PM, #2

RE: Another victim of rear camber..., 9D9 MITSU RS, Nov-24-02 03:08 PM, #3

RE: Another victim of rear camber..., HiOnPSI, Nov-25-02 01:49 AM, #4

RE: Another victim of rear camber..., SonicYan, Nov-25-02 06:46 AM, #5

RE: Another victim of rear camber..., 9D9 MITSU RS, Nov-25-02 07:19 AM, #6

RE: Another victim of rear camber..., Stickman, Nov-25-02 09:38 AM, #7

RE: Another victim of rear camber..., sonikbewm, Nov-26-02 01:19 AM, #8

RE: Another victim of rear camber..., Dseclipse, Nov-26-02 05:30 AM, #9

RE: Another victim of rear camber..., HiOnPSI, Nov-26-02 11:32 AM, #10

RE: Another victim of rear camber..., sonikbewm, Nov-26-02 12:23 PM, #11

RE: Another victim of rear camber..., Mystic511, Nov-27-02 01:25 AM, #12

RE: Another victim of rear camber..., HiOnPSI, Nov-27-02 12:17 PM, #13

RE: Another victim of rear camber..., SonicYan, Nov-27-02 12:26 PM, #14

RE: Another victim of rear camber..., mrlocalpimp, Nov-27-02 01:50 PM, #15

RE: Another victim of rear camber..., vegasdsmr, Nov-28-02 05:32 AM, #16

RE: Another victim of rear camber..., mrlocalpimp, Nov-28-02 09:53 AM, #17

RE: Another victim of rear camber..., slacker911, Nov-28-02 01:04 PM, #18

RE: Another victim of rear camber..., HiOnPSI, Nov-28-02 04:09 PM, #19

RE: Another victim of rear camber..., HiOnPSI, Nov-29-02 12:09 PM, #20

RE: Another victim of rear camber..., Team

Team

eclipse804, Nov-30-02 09:12 PM, #21

RE: Another victim of rear camber..., HiOnPSI, Dec-01-02 03:12 AM, #22

RE: Another victim of rear camber..., Boofer97rs, Dec-01-02 06:50 AM, #23

RE: Another victim of rear camber..., Talow79, Dec-01-02 09:44 AM, #24

RE: Another victim of rear camber..., mrlocalpimp, Dec-01-02 01:12 PM, #25

RE: Another victim of rear camber..., HiOnPSI, Dec-01-02 02:21 PM, #26

RE: Another victim of rear camber..., HiOnPSI, Dec-01-02 02:26 PM, #27

RE: Another victim of rear camber..., HiOnPSI, Dec-01-02 02:32 PM, #28

RE: Another victim of rear camber..., mrlocalpimp, Dec-01-02 02:40 PM, #29

RE: Another victim of rear camber..., HiOnPSI, Dec-02-02 11:44 AM, #30

bullox	Nov-24-02 01:45 PM
Donating 2GNT member 6702 posts,

#13651, "RE: Another victim of rear camber..."
In response to Reply # 0

damn, i never noticed it before, but I can really tell your rear camber is off just by your pics...

I've seen a $15 camber mod link, either check the main page or do a search

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

HiOnPSI	Nov-24-02 02:42 PM
Member since Mar 28th 2002 2745 posts,

#13652, "RE: Another victim of rear camber..."
In response to Reply # 1

LOL, my back tires seriously look like indy slicks.
I think it mentions on there that it's not meant for serious drop
i could be wrong though.

Jon

1997 Eclipse RS

14.21@101mph 10/4/02

MODS: 8.8:1 JE Pistons / Eagle rods / Stage 1 Hahn turbocharger / Melling Oil Pump / Autometer 5" tach / 4 JL 12" W0 subwoofers / Clarion 230w amp / short shifter mod / GReddy EVO exhaust / custom 2 1/2" downpipe / no cat con / CM Stage 1 / 30lb Mustang injectors / TurboXS MBC / 1G SMIC / Eibach Sportline springs / KYB GR-2 struts / GReddy 52mm EGT / A'PEXi Super AFC

Jon

1997 Eclipse RS | 2001 Lexus IS300
12.671 @ 111.660 1.586 60' 5/28/04

www.haiokuracing.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

9D9 MITSU RS	Nov-24-02 03:08 PM
Donating 2GNT member 6845 posts,

#13653, "RE: Another victim of rear camber..."
In response to Reply # 2

when I had sportlines, the front was always fine. I now have prokit- still good. I did the RRE kit, which is bolts and spacers. Could have done it a lot cheaper myself, but I wanted to make certain I got the right parts. Get some longer bolts and some spacers to move the control arms out some and then get it lined up. Should do justa s good as a $200 kit. My tire wear is normal now. I've had the same tires for a long time. Check the $15 camber mod on the main page. You just may need longer bolts and a few more spacers. The alignment shop told me with the RRE kit, that I coulda used an extra spacer for each bolt probably. I raised it to pro kits tho. Anyhow, long post. Hope this helps.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

HiOnPSI	Nov-25-02 01:49 AM
Member since Mar 28th 2002 2745 posts,

#13654, "RE: Another victim of rear camber..."
In response to Reply # 3

thanks, i plan on using the RRE kit, i'll probably order it next time i get paid..and as for tires, who knows....

Jon

1997 Eclipse RS

14.21@101mph 10/4/02

MODS: 8.8:1 JE Pistons / Eagle rods / Stage 1 Hahn turbocharger / Melling Oil Pump / Autometer 5" tach / 4 JL 12" W0 subwoofers / Clarion 230w amp / short shifter mod / GReddy EVO exhaust / custom 2 1/2" downpipe / no cat con / CM Stage 1 / 30lb Mustang injectors / TurboXS MBC / 1G SMIC / Eibach Sportline springs / KYB GR-2 struts / GReddy 52mm EGT / A'PEXi Super AFC

Jon

1997 Eclipse RS | 2001 Lexus IS300
12.671 @ 111.660 1.586 60' 5/28/04

www.haiokuracing.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

SonicYan	Nov-25-02 06:46 AM
Old School 2GNTer 1560 posts,

#13655, "RE: Another victim of rear camber..."
In response to Reply # 4

Hmmm, I was wondering about this. I also have Sportlines and I only have one of those NAPA rear camber kits and it works fine. But my fronts are kinda out of spec, like its at -1.2 on the right and -0.9 on the left. Now, I recently rotated my tires and the insides of my right front is starting to wear faster than all the other tires. So, I was wondering what u guys did to ur front camber. I only put on the RRE front camber kit, which is good for the prokits, like about a degree of correction. Mine was still out of spec tho. So, any other camber kits out there and how much are they? I don't wanna burn through tires every now and then. But so far, I've had the tires for 10K miles and they're still looking good. The tires have been on the drop for around 8K miles or so.

SonicYan aka Mikey
1997 Eclipse RS
Pinoy Reppin' SoCal 2GNT
Best: 16.35 @ 83.05 MPH

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

9D9 MITSU RS	Nov-25-02 07:19 AM
Donating 2GNT member 6845 posts,

#13656, "RE: Another victim of rear camber..."
In response to Reply # 5

the rre kit needed more spacers according to my alignment shop. (for sportlines) It didn't wear badly or anything tho. After pro kits, it's pretty much perfect.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Stickman	Nov-25-02 09:38 AM
Member since Aug 23rd 2002 151 posts,

#13657, "RE: Another victim of rear camber..."
In response to Reply # 6

when I dropped my car,the rear camber was off by like -3.5...

I got one of the camber kits from Sprint,and that brought it out to -.5 .

~Blake

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

sonikbewm	Nov-26-02 01:19 AM
Member since Dec 01st 2001 4011 posts,

#13658, "RE: Another victim of rear camber..."
In response to Reply # 7

I got my Ingall's camber kit off EBay for $100. That was for front and rear.

Jason
'11 Ford Mustang GT/CS
'11 Ford Mustang V6 6-Speed (SOLD)
'04 Nissan 350z Touring (SOLD)
'95 Turbo Eclipse GS (SOLD and will be missed)
'90 Talon TSi AWD (SOLD)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Dseclipse	Nov-26-02 05:30 AM
Member since Nov 16th 2002 29 posts,

#13659, "RE: Another victim of rear camber..."
In response to Reply # 8

There are some Ingall's for sale on www.groupbuycenter.com for descent price. Check out www.mofugus.com a new product shown in the new Import Tuner. Looks like those mofugus are only made for our cars.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

HiOnPSI	Nov-26-02 11:32 AM
Member since Mar 28th 2002 2745 posts,

#13660, "RE: Another victim of rear camber..."
In response to Reply # 9

Hmm, i looked at that GroupBuy center thing, how come there are two different sets for the 1995-99 Eclipse rear..one's 25, and one's 85..
strange.

Jon

1997 Eclipse RS

14.21@101mph 10/4/02

MODS: 8.8:1 JE Pistons / Eagle rods / Stage 1 Hahn turbocharger / Melling Oil Pump / Autometer 5" tach / 4 JL 12" W0 subwoofers / Clarion 230w amp / short shifter mod / GReddy EVO exhaust / custom 2 1/2" downpipe / no cat con / CM Stage 1 / 30lb Mustang injectors / TurboXS MBC / 1G SMIC / Eibach Sportline springs / KYB GR-2 struts / GReddy 52mm EGT / A'PEXi Super AFC

Jon

1997 Eclipse RS | 2001 Lexus IS300
12.671 @ 111.660 1.586 60' 5/28/04

www.haiokuracing.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

sonikbewm	Nov-26-02 12:23 PM
Member since Dec 01st 2001 4011 posts,

#13661, "RE: Another victim of rear camber..."
In response to Reply # 10

I think that you are going to want part number 35860 which is $95 on that site so you can correct up to 3.0.

Jason
'11 Ford Mustang GT/CS
'11 Ford Mustang V6 6-Speed (SOLD)
'04 Nissan 350z Touring (SOLD)
'95 Turbo Eclipse GS (SOLD and will be missed)
'90 Talon TSi AWD (SOLD)

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Mystic511	Nov-27-02 01:25 AM
Donating 2GNT member 1582 posts,

#13662, "RE: Another victim of rear camber..."
In response to Reply # 11

Save your money, the 15 dollar rear camber mod is well... 15 bucks and it only took me 20 minutes to put on.

The front camber should be fine if you stay above a 2" drop.

One note though, the writeup says to use 4 washers, but i'd suggest 5. Four brought me just within stock specs.

http://www.2gnt.com/www/files/rearcamber.htm

Save yourself from expensive camber kits. trust me.

16.1 @ 87.11
http://www.virtuallyinfamous.com

ARD 57mm tb and p&p manifold, Neuspeed STB, Pro-kits, Illuminas, Injen CAI with K&N, 2.5" pacesetter catback,
AF/X UDP, Rear STB, Powerslot rotors, RRE SS Brakelines.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

HiOnPSI	Nov-27-02 12:17 PM
Member since Mar 28th 2002 2745 posts,

#13663, "RE: Another victim of rear camber..."
In response to Reply # 12

I'm really trying to, now that i have my new digital camera, i'm going ot take a picture of my tire tomorrow and i'll get it over to you guys.
Remember: this tire had 60+ % of its tread, back in August.

Now it's a drag slick with a hole in it.

Saving money is great for me right now, my income is just short of sucking shit. I'll try the camber mod, but you suggest i add one more washer??

And I have the sportlines, so i'm betting that if it isn't past 2", it's damn near.

Jon

1997 Eclipse RS

14.21@101mph 10/4/02

MODS: 8.8:1 JE Pistons / Eagle rods / Stage 1 Hahn turbocharger / Melling Oil Pump / Autometer 5" tach / 4 JL 12" W0 subwoofers / Clarion 230w amp / short shifter mod / GReddy EVO exhaust / custom 2 1/2" downpipe / no cat con / CM Stage 1 / 30lb Mustang injectors / TurboXS MBC / 1G SMIC / Eibach Sportline springs / KYB GR-2 struts / GReddy 52mm EGT / A'PEXi Super AFC

Jon

1997 Eclipse RS | 2001 Lexus IS300
12.671 @ 111.660 1.586 60' 5/28/04

www.haiokuracing.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

SonicYan	Nov-27-02 12:26 PM
Old School 2GNTer 1560 posts,

#13664, "RE: Another victim of rear camber..."
In response to Reply # 13

Update me on this too as well. That sux tho, I should have bought these ones in the first place if they were the same price as RREs. But if I waited for this group buy tho, I'd prolly be out of tires faster. O well, keep me posted. Thanks.

SonicYan aka Mikey
1997 Eclipse RS
Pinoy Reppin' SoCal 2GNT
Best: 16.35 @ 83.05 MPH

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

mrlocalpimp	Nov-27-02 01:50 PM
Old School 2GNTer 4518 posts,

#13665, "RE: Another victim of rear camber..."
In response to Reply # 3

I have dropzones, inner of back tires get fucked fast. Im buying new tires every 2 months or so. Sucks hard. Have no clue how to fix camber. Wait, I do, but I cant get any screws or bolts off at all.

EDIT: Can someone explain how to get the bolts off with the $15 mod? I bought everything but I cant get those damn a-arm bolts off. ANY of them. I only need the back fixed, but thats a total of 16 bolts that wont budge. Im using breaker bar and everything. Wah.

I got banned for being a constant tard.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

vegasdsmr	Nov-28-02 05:32 AM
Old School 2GNTer 4713 posts,

#13666, "RE: Another victim of rear camber..."
In response to Reply # 15

try sum wd 40 or rust eater on them bolts....

good luck... patience will get u there emoji

03 srt-4 13.130@112.47mph (n2o, stock turbo, 10/2003)
now: 20g, portfueler, bpu+++ (track/dyno times tbd...)

i farted on your wiki

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

mrlocalpimp	Nov-28-02 09:53 AM
Old School 2GNTer 4518 posts,

#13667, "RE: Another victim of rear camber..."
In response to Reply # 16

Thank vegas, your words are really what I needed for motivation. Since I got friday off, Im going to go buy every type of bolt loosening liquid I can find and spend the day with it. I will not fail!

I got banned for being a constant tard.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

slacker911	Nov-28-02 01:04 PM
Donating 2GNT member 1149 posts,

#13668, "RE: Another victim of rear camber..."
In response to Reply # 17

I did the $15 rear camber mod it worked fine but I am droped 2" so my camber is still not very good. If you have over a 1.5" drop get a real kit if not the $15 mod will work great.

Slacker Motorsports
Some stuff......

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

HiOnPSI	Nov-28-02 04:09 PM
Member since Mar 28th 2002 2745 posts,

#13669, "RE: Another victim of rear camber..."
In response to Reply # 18

Pardon the size...

Got slicks??! emoji

Jon

1997 Eclipse RS

14.21@101mph 10/4/02

MODS: 8.8:1 JE Pistons / Eagle rods / Stage 1 Hahn turbocharger / Melling Oil Pump / Autometer 5" tach / 4 JL 12" W0 subwoofers / Clarion 230w amp / short shifter mod / GReddy EVO exhaust / custom 2 1/2" downpipe / no cat con / CM Stage 1 / 30lb Mustang injectors / TurboXS MBC / 1G SMIC / Eibach Sportline springs / KYB GR-2 struts / GReddy 52mm EGT / A'PEXi Super AFC

Jon

1997 Eclipse RS | 2001 Lexus IS300
12.671 @ 111.660 1.586 60' 5/28/04

www.haiokuracing.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

HiOnPSI	Nov-29-02 12:09 PM
Member since Mar 28th 2002 2745 posts,

#13670, "RE: Another victim of rear camber..."
In response to Reply # 19

Yay, going tomorrow to Home Depot to buy the accessories for the camber adjustment...

Jon

1997 Eclipse RS

14.21@101mph 10/4/02

MODS: 8.8:1 JE Pistons / Eagle rods / Stage 1 Hahn turbocharger / Melling Oil Pump / Autometer 5" tach / 4 JL 12" W0 subwoofers / Clarion 230w amp / short shifter mod / GReddy EVO exhaust / custom 2 1/2" downpipe / no cat con / CM Stage 1 / 30lb Mustang injectors / TurboXS MBC / 1G SMIC / Eibach Sportline springs / KYB GR-2 struts / GReddy 52mm EGT / A'PEXi Super AFC

Jon

1997 Eclipse RS | 2001 Lexus IS300
12.671 @ 111.660 1.586 60' 5/28/04

www.haiokuracing.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

eclipse804	Nov-30-02 09:12 PM
Donating 2GNT member 5174 posts,

#13671, "RE: Another victim of rear camber..."
In response to Reply # 20

Woah those tires REALLY are worn out. Did you end up finding all the parts for the $15 mod? Someone should start selling these kits for us 2gnt members cheap emoji

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

HiOnPSI	Dec-01-02 03:12 AM
Member since Mar 28th 2002 2745 posts,

#13672, "RE: Another victim of rear camber..."
In response to Reply # 21

I bought out both Home Depots in town and the Lowe's, and I don't know where else to go. I'm gonna try ACE today, and go way way way out in the middle of nowhere and try that Lowe's, that's my last resort, if no one has it, i'm gonna be pissed. i have 2 BOLTS TO GO!!!!

Hmm...I'll look into getting a kit in order...

All i could find were spec 8, though.

Jon

1997 Eclipse RS

14.21@101mph 10/4/02

MODS: 8.8:1 JE Pistons / Eagle rods / Stage 1 Hahn turbocharger / Melling Oil Pump / Autometer 5" tach / 4 JL 12" W0 subwoofers / Clarion 230w amp / short shifter mod / GReddy EVO exhaust / custom 2 1/2" downpipe / no cat con / CM Stage 1 / 30lb Mustang injectors / TurboXS MBC / 1G SMIC / Eibach Sportline springs / KYB GR-2 struts / GReddy 52mm EGT / A'PEXi Super AFC

Jon

1997 Eclipse RS | 2001 Lexus IS300
12.671 @ 111.660 1.586 60' 5/28/04

www.haiokuracing.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Boofer97rs	Dec-01-02 06:50 AM
Old School 2GNTer 800 posts,

#13673, "RE: Another victim of rear camber..."
In response to Reply # 22

what size tires do you have? If i could find some used ones at work, i would let you have them for a really cheap price.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Talow79	Dec-01-02 09:44 AM
Old School 2GNTer 34 posts,

#13674, "RE: Another victim of rear camber..."
In response to Reply # 0

Get the bolt size from the $15 page and go to Autozone. Thats where I got my bolts from!

96 ESI, Eibach pro-kit, Iceman CAI, Greddy Cat-Back, MSD Ignition
Other rides:
92 Dodge Ram 4x4
96 Jeep Grand Cherokee 4X4
2004 Honda Civic EX
2002 BMW 325i
2008 Nissan Armada

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

mrlocalpimp	Dec-01-02 01:12 PM
Old School 2GNTer 4518 posts,

#13675, "RE: Another victim of rear camber..."
In response to Reply # 24

I did the $15 mod saturday. Not sure why, but the bolts came right off, I was expecting to be fighting all day. So the whole thing only took 1 1/2 hours since I rotated tires too.

Couldnt find crap at home depot, and no one there wants to help. Had to hit up three Ace Hardwares for everything.

Used 6 washers on each bolt.

Camber is still off, but not nearly as much. Even with the camber slightly off, I can tell Ill be getting much much better tire wear thank god. And the car rides MUCH smoother.

I got banned for being a constant tard.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

HiOnPSI	Dec-01-02 02:21 PM
Member since Mar 28th 2002 2745 posts,

#13676, "RE: Another victim of rear camber..."
In response to Reply # 25

GOD DAMN COCK SUCKING ASS RAPING BITCHES!!!!!

sorry, tire #2 blew today, which really PISSES ME OFF!!! I was so close to getting the mod done. I think i'll go tkae some pics.

Jon

1997 Eclipse RS

14.21@101mph 10/4/02

MODS: 8.8:1 JE Pistons / Eagle rods / Stage 1 Hahn turbocharger / Melling Oil Pump / Autometer 5" tach / 4 JL 12" W0 subwoofers / Clarion 230w amp / short shifter mod / GReddy EVO exhaust / custom 2 1/2" downpipe / no cat con / CM Stage 1 / 30lb Mustang injectors / TurboXS MBC / 1G SMIC / Eibach Sportline springs / KYB GR-2 struts / GReddy 52mm EGT / A'PEXi Super AFC

Jon

1997 Eclipse RS | 2001 Lexus IS300
12.671 @ 111.660 1.586 60' 5/28/04

www.haiokuracing.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

HiOnPSI	Dec-01-02 02:26 PM
Member since Mar 28th 2002 2745 posts,

#13677, "RE: Another victim of rear camber..."
In response to Reply # 26

hey localpimp did you get an alignment after you finished it??!

Jon

1997 Eclipse RS

14.21@101mph 10/4/02

MODS: 8.8:1 JE Pistons / Eagle rods / Stage 1 Hahn turbocharger / Melling Oil Pump / Autometer 5" tach / 4 JL 12" W0 subwoofers / Clarion 230w amp / short shifter mod / GReddy EVO exhaust / custom 2 1/2" downpipe / no cat con / CM Stage 1 / 30lb Mustang injectors / TurboXS MBC / 1G SMIC / Eibach Sportline springs / KYB GR-2 struts / GReddy 52mm EGT / A'PEXi Super AFC

Jon

1997 Eclipse RS | 2001 Lexus IS300
12.671 @ 111.660 1.586 60' 5/28/04

www.haiokuracing.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

HiOnPSI	Dec-01-02 02:32 PM
Member since Mar 28th 2002 2745 posts,

#13678, "RE: Another victim of rear camber..."
In response to Reply # 27

Well, do you think i should do 6 washers or not??? I have a feeling that my camber is relatively off.

Jon

1997 Eclipse RS

14.21@101mph 10/4/02

MODS: 8.8:1 JE Pistons / Eagle rods / Stage 1 Hahn turbocharger / Melling Oil Pump / Autometer 5" tach / 4 JL 12" W0 subwoofers / Clarion 230w amp / short shifter mod / GReddy EVO exhaust / custom 2 1/2" downpipe / no cat con / CM Stage 1 / 30lb Mustang injectors / TurboXS MBC / 1G SMIC / Eibach Sportline springs / KYB GR-2 struts / GReddy 52mm EGT / A'PEXi Super AFC

Jon

1997 Eclipse RS | 2001 Lexus IS300
12.671 @ 111.660 1.586 60' 5/28/04

www.haiokuracing.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

mrlocalpimp	Dec-01-02 02:40 PM
Old School 2GNTer 4518 posts,

#13679, "RE: Another victim of rear camber..."
In response to Reply # 28

Nope, didnt get an alignment, but everything feels so smooth and straight, no leaning or anything.

Personally, I think you should do 8-9 washers. Not with the listed mod bolts tho. Im thinking next weekend I will re-do everything. Im going to get slightly longer bolts than the M10X40 1.25 bolts, and add 3 washers to take it from 6 to 9.

If I were you, Id get slightly longer bolts and do 8-9 washers, probably 9. Seems safe enough as long as the bolts are long and strong enough IE grade 10.

Also, as I will be getting the same bolts but longer, what am I looking for compared to M10X40 1.25? I dont know what any of those numbers mean, so, what am I looking for to get the same type but slightly longer bolts?

I got banned for being a constant tard.

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

HiOnPSI	Dec-02-02 11:44 AM
Member since Mar 28th 2002 2745 posts,

#13680, "RE: Another victim of rear camber..."
In response to Reply # 29

I finished the camber mod today, I did 6 washers. My tires seem straighter, but it could be just my mind telling me they're straighter. I'm going to have an alignment done tomorrow, i know there is something I shoudl tell them, and since i'm no suspension master, i'm going to ask you guys.

If i can remember right, i'm supposed to tell them to shoot for zero toe, is that correct? Or is it camber?

BTW, the bolts loosened rather easily, but the right rear tire, the upper left bolt on the a-arm bracket is a whore, thanks to my gas tank. I managed to do it all within an hour.

Jon

1997 Eclipse RS

14.21@101mph 10/4/02

MODS: 8.8:1 JE Pistons / Eagle rods / Stage 1 Hahn turbocharger / Melling Oil Pump / Autometer 5" tach / 4 JL 12" W0 subwoofers / Clarion 230w amp / short shifter mod / GReddy EVO exhaust / custom 2 1/2" downpipe / no cat con / CM Stage 1 / 30lb Mustang injectors / TurboXS MBC / 1G SMIC / Eibach Sportline springs / KYB GR-2 struts / GReddy 52mm EGT / A'PEXi Super AFC

Jon

1997 Eclipse RS | 2001 Lexus IS300
12.671 @ 111.660 1.586 60' 5/28/04

www.haiokuracing.com

Report This Post to Admin

Printer-friendly copy | Reply | Reply with quote | Top

Top

Handling/Suspension

topic #13650

Previous topic | Next topic

Powered by DCForum+ Version 2.2
Copyright 1997-2005 DCScripts.com, Copyright 2005-2026 2gnt.com

Generated in 0.056 seconds, executing 74 queries.