I need to get some locking tuner lug nuts - anyone know a good brand and cheap place to get em?

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

and tire place that sells rims should have them or can get them, I picked up a set from NTB

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

Hey marcus,
i have mcgard spline drive nuts. they are nice because you need a special key to remove all the nuts and they also come with an actual lock for each wheel. this means you hae to have 2 keys, but for the added safety its worth it. they also have a free spinning taper section so they won't mess up the finish on the wheels. i would highly reccommend them i think the entire set is like 50 or 60 bucks
lates
james

Rest In Peace Heidi Doggy

I see locking tuner lug nuts on eBay all the time too. Might want to check there.

You are not your job.
You're not how much money you have in the bank.
You're not the car you drive.
You're not the contents of your wallet.
You're not your fu**ing post count.

97 Eclipse GS - *SOLD*
01 Audi A6 2.7T
01 YZF-R6

I got a nice set of Gorilla Nuts(locking) from Summit Racing. I think they were around $35.

http://www.cardomain.com/ride/3130861

Thanks guys, the lug nuts I have now look just like the McGard spline drive lug nuts but I think it's another brand. You use a tool that cose around the lug nut in order to loosen/tighten. It's a very tight fit. I can't seem to find the spine drive locking lug nuts as a set of four by themselves tho. I only need 4...any ideas?

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

I see them on ebay all the time for like $25 & $30

ASE certified master auto technician

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=1871105472

ASE certified master auto technician