Anyone??

_______________________________________________________

No. But most people do the $15 camber mod. I didn't need a camber kit when I put my Supension Tech springs on but then they settled just shy of a 2" drop and I ended up doing the $15 camber mod. Wait till they settle and then decide. You will be able to tell if your camber is out of wack.

_________________
James

Yeah, I got the prokits and my camber was only a little off but just in the rear. I did the $15 camber mod (cost me $19 dammit) and all is well. But thats about it.

yes do the camber kit on any kind of drop..

-Jason

97 Talon ESi-T (forever in progress...)


95 GS (Gone)
16.74@83.18mph
119.8 whp - 113.3 lbs/ft


2GNT #677
My Wiki Page: www.2gnt.com/index.php?d=Iamnotwhoiam
Pictures: http://picasaweb.google.com/iamnotwhoiam/Talon/

I'm kinda pissed off because I have the Pro-Kit and have done the $15 camber mod but after 6 washers it is still off in the back by a good degree or 2. Any suggestions?

Luke

1998 Mustang GT 5-speed
2002 Lone Star Shelby Cobra Replica

Wow! thats amazing...6 washers!

You know that stock camber specs for the rear is negative (-) 1.25 or so, right?

I used the rear camber kit and that was it. No front necessary and camber has been good for a long time.

_____________________________________
Jason ESi-T

04' BMW 325Ci
91' Nissan 240SX
98' Eagle Talon ESi (sold)

i just got done doing the $15 camber mod and used 5 washers and it worked great. Havent gotten it realligned to find out the numbers, but it looks much better than before. and yes our stock camber is about -1 degree, so if its slanted some its normal.

-Jason

97 Talon ESi-T (forever in progress...)


95 GS (Gone)
16.74@83.18mph
119.8 whp - 113.3 lbs/ft


2GNT #677
My Wiki Page: www.2gnt.com/index.php?d=Iamnotwhoiam
Pictures: http://picasaweb.google.com/iamnotwhoiam/Talon/