I just got my springs bt, have no idea how to install them. Could anybody help me out. Should I get somebody to help me out or is it a one man job. I'll need step-by-step instruction. Thanks in advance

http://www.2gnt.com/www/corbin/struts.html

Its a one person job. Took me about 3 1/2 hours.

_________________
James

I did mine all by myself with no knowledge of suspension...took me all weekend. Now I could do it in about 4hrs..I used Corbin's write-up and thats it! take you time and have a good breaker bar and a full can of WD40..you dont even need a spring compressor. When I ran into problems during the install I posted on here and my questions were answered quickly. Where are you located maybe someone is close and would like some free beer

AFX/UDP,AEM,AF/X 55mm TB,50 shot of NOS,Glenn's short shifter,17" tantrum,prokit KYB AGX,JL stealthbox sony headunit,audiobahn amp,M3 style mirrors,Blue leds,yellow fogs,reverse ind,w

Hey man, I have raised and lowered mine like 5 times, if you need a hand and are in NC, I could do the whole car in like 2 hours (No shit) I wouldn't mind, let me know.

______________________________________________________________
1999 Civic SI, Boosted and built, 12.67@112.

Gone but not forgotten.....
1998 Eagle Talon ESI, built and boosted 14.2@98
1992 Eagle Talon TSI AWD12.91@104
1992 Honda Hatch swapped and sprayed14.0@108

2 of my friends did it for me in about 1.5hrs. I could of probably done it if I had the tools but I woulda needed a friend and 4hrs.

--- My 2gnt WIKI contribution ---> http://www.jamlez.com/2gnt

97 Eclipse Spyder

Thanks guys.