Awhile ago, someone posted about installing the AEM wideband with the megasquirt. They talked about how it was reading correctly on the screen or whatnot, but then they changed some things up and got it going correctly.

I was wondering if someone could tell me the process I need to do to changing the MS setup to read the AEM eugo correctly and what color wire off the aem harness needs to be wired to the MS harness.

Thanks!

-MIKE-

Stroked 2.2L

You did look through this thread, yes?

http://forums.2gnt.com/dcboard.php?az=show_topic&forum=54&topic_id=3031&mesg_id=3031&page=&topic_page=1

Don't know if that helps.

Captain Caveman

96 RS Turbo 11.414 @ 119.62 MSNS, Crower 2 NA cams, BW366, 10.5 comp, UDP, 60mm TB, W/A intercooler, 3.55 tranny 567.9whp 430tq
97 RS NA 13.188 @ 103.87 MSnS powered 12.5 comp, Crower 3's and 219.4whp with 175tq
98 RS DD 12.5 comp on stock ECU, LTH, Crower 2's, Koni, GC, Hypercoil, DG hats
99 OZ 5sp Stocker 15.856 @ 85.97
99 GS stocker auto 17.7@77mph!

wiki home page:http://www.2gnt.com/index.php?d=bullettdsm