I have my ms all wired in right now. I am waiting on my injectors before use ms for more than logging. I am using the innovate wideband and having some logging problems. I think I setup ms correctly but it logs funny. I have the innovate selected unthe the settings file. I have the switchpoint set at 2.45 volts and when I am reading this in Megatune in the realtime display thats is what it says for 02 voltage at 14.7 afr. I made a few logs at idle today and the log viewer says my afr is like 11.5 or something. It is steady but wrong. I have the xd-1 gauge and it reads 14.7 the whole time. Do I have to make changes in log viewer or something?
EDIT: Ok I just found the afr table in log viewer. And it dosent match my wideband settings which is why my logs look funny. Is thier a table setup up for my wideband allready? That would suck to have to manually put in all those numbers. Thanks
sam

I found the calbration program but when I click on the innovate tab it says access denied. How can I set this thing up?

You have to manually enter the numbers in the calibration program. For some reason when you choose your wideband it doesnt work. Mine didnt either for the tech edge.

Enter your high value and low value and you should be ok Sam.

Terry

Thanks Terry. So I should just plug in the the low, high and maybe the 14.7 afr voltage too? Will it still be accurate with just three numbers?

Ok I get andd got it too. You ment in the table maker. So for anyone else using the innovate wideband to creat your table use 0.0v=10 and 5.0v=20