Does anybody knows if the old AIC has the quantity of resistor by the number of injectors that you will install. I mean, 4 resistor for four injectors, 6 resistor for 6 injectors. I have this unit and the injector harness for 4 injector is no more available.
I will make the 8-injector setup(Corbin) and I will make the injector harness.

The unit came with 2 resistors in parallel and the driver cables I already found them. It seems that each driver cable will handle 2 injectors for 4 injector setup. 3 injector for 6 injectors setup and 4 injectors for the 8 injectors setup.
Thanks.

Thier is 2 driver lines, so 1 for 2 injectors. So you would only need 2 resistors, one on each driver.

____________________________________________________
four nails four corners four riders and four horses

Thanks for the info. Last night I finished the 8 injector setup and the injector wiring. It is working great. Need to tune it now. I have make a few adjustment to the AIC controller at 10 psi. Working great.
Got AIC from e-bay for $125 and four 330 cc injectors for $55.
I'm loving it!