THERE ARE 2 OIL SENSORS. I AM TRYIN TO HOOK AN OIL PRESSURE AND OIL TEMP GAUGE. MY QUESTION IS THIS.....
WHICH ONE IS WHICH? ONE HAS 1 WIRE COMING OUT OF IT AND THE OTHER HAS LIKE 2 WIRES. WHICH ONE IS THE OIL TEMP AND WHICH IS THE PRESSURE? AND IF IT SETS OFF THE CHECK ENGINGE LIGHT THEN HOW DO I BYPASS THAT?
What are you talking about and why is your subject gauge pods???? there is only one oil sender unit its the one on the back of the motor towards the driver side the one on the other side is a knock sensor if you unplug the oil sender plug it will throw a check engine light to fix it plug it back in, in order to hook up an aftermarket oil pressure gauge you will need to tee off that hole so that you can plug both the new and old sender unit in, all this info is here on the site search and quit asking stupid questions!!!! or your just gonna get stupid answers
98 RS: Mods: Custom Stage 2 Turbo kit , 55mm throttle body, gutted cat, evo cat back exhaust, p/p intake manifold,p/p Head, af-x underdrive pulley, B&M short throw shifter,Built bottom end Je pistons eagle rods 8.8:1 compression.
Status:Up and running again! nice new paint
Custom stage 2 hahn turbo kit Hahn Super 16g turbo (ceramic coated) Hahn manifold (ceramic coated) Hahn Downpipe assembly Hahn intercooler piping smic Hahn oil line kit Type s bov 2G Gsx smic walbro 255 fuel pump Synapse missing link Vortech s-fmu NGK Bkr7e11 Plugs A-pillar w/boost, a/f, oil pressure gauges
come to think of it your right it will not throw a cel what it will do though is throw your oil light i got mixed up but either way, your gonna have a light on
98 RS: Mods: Custom Stage 2 Turbo kit , 55mm throttle body, gutted cat, evo cat back exhaust, p/p intake manifold,p/p Head, af-x underdrive pulley, B&M short throw shifter,Built bottom end Je pistons eagle rods 8.8:1 compression.
Status:Up and running again! nice new paint
Custom stage 2 hahn turbo kit Hahn Super 16g turbo (ceramic coated) Hahn manifold (ceramic coated) Hahn Downpipe assembly Hahn intercooler piping smic Hahn oil line kit Type s bov 2G Gsx smic walbro 255 fuel pump Synapse missing link Vortech s-fmu NGK Bkr7e11 Plugs A-pillar w/boost, a/f, oil pressure gauges
#97993, "RE: GAUGE PODS" In response to Reply # 4 Apr-19-06 09:32 AM by djtrickee
Originally posted by joeck76 come to think of it your right it will not throw a cel what it will do though is throw your oil light i got mixed up but either way, your gonna have a light on
N/M. Too easy.
......................................................................................................................... Built. That's All... ......................................................................................................................... www.monkeybuttpirate.com ......................................................................................................................... 2 Fingers of Scotch with a milk back... Stat!
Well, assuming this is a serious question: There is no oil temperature gauge stock on the car. The only 2 sensor setup on the engine is the CLT where there's one for the ECU and one for the gauge. As for oil temp, when I installed mine, I had to drill a hole in the back side of the pan and install it myself. I got a flange and a gasket that works and no leaks yet! I did mine in the back of the pan for easier access up and to the dash. Be careful, since the passenger side axle is over there and you don't want contact. Remember as well that the axle moves when the suspension does, so you want it waaaaay clear of that.
Brian
Red 97 Eclipse GS (420a) MTX Custom Garrett T3 Turbo system Megasquirt w/52 lb/hr injectors & a Walbro 255 Kicker/Alpine Audio (3 amps, 2 subs) 90 Cav 2.2 TBI auto (winter) <- yeah, it's fast
Search
Printer-friendly copy
1 User in Chat
