This my first engine job for an eclipse. i just got a used
420a and need to know if any1 can tell me step-by-step how to
put it into a 97 rs.


-Jeff

.........................................................................................................................

Built. That's All...
.........................................................................................................................
www.monkeybuttpirate.com
.........................................................................................................................
2 Fingers of Scotch with a milk back... Stat!

no its not. i already looked at that and it only has putting it together. i have it already put together and need to just take the old 1 out and put the new 1 in. RETARD!

*cough*shop manual*cough*

1993 Eagle Talon TSI AWD: balance shafts, cruise & AC removed; 16psi, Dejon intake & UICP, ported 14b, EVOIII mani, ported 2G O2 housing, 2.5" Buschur dp to 3" Thermal exhaust, datalogger, front strut brace, prothane motor mounts

1995 Eclipse RS U-Boot; Tokico Illuminas, GSX front brakes, ST front swaybar, short shifter, CAI with K&N filter, rear disks and swaybar, front upper and rear lower strut braces, beater exterior

Okay. take the old one out. Put the new one in. There you go, in two steps.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

sorry im retarded. just thought that it might b a little difficult and to c if any1 had tips but i guess no1 has any advice for the young kid...

it isn't that, but when you post and say, "Hey, can you tell me step by step how to do something complex and involved?" It makes us think that you haven't even bothered to do any esearch. There's a ton of information here, so try the search, look around, and if you have any specific questions, ask. We're not going to spoonfeed you information.

______________________________
If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.

'95 Eclipse TurboGS (garage deco)
'95 TSi AWD (restoring a survivor)
'97 Talon ESi-T (poor impulse control)
'99 Eclipse RS-T (daily beater)
'13 Evo X (mostly stock)
'17 Sienna (Middle Aged Dad Mobile)



Factory Service Manuals: http://nawdu.de/files/

Jeff,

There are plenty of good shop manuals out. Two that come to mind are Haynes (available everywhere) and www.alldatadiy.com

These both have very detailed step by step instructions to do this job correctly.

When you post a question like "post every step I need to do to do a large job" it comes across as two things:

1. You don't know how to do it yourself and need help
2. You haven't looked into anything yourself

Number 2 is very frustrating, because it symbolizes laziness. That's why these guys haven't taken the time to write out a step by step process. Because it's already been done.


Now, in the future, if you were to say, "hey guys, I was taking my motor out, and I don't know how to remove my blinker fluid overflow canister, any ideas?", then we'd be happy to give you pointers in the right direction.

Hope this makes sense.

Brian

Red 97 Eclipse GS (420a) MTX
Custom Garrett T3 Turbo system
Megasquirt w/52 lb/hr injectors & a Walbro 255
Kicker/Alpine Audio (3 amps, 2 subs)
90 Cav 2.2 TBI auto (winter) <- yeah, it's fast

thanks for the pointers guys. ill look more in depth next time before asking questions like that. it really is my first time doing an engine job by myself and i am very lazy. thanks again. ill post if i run into problems that i cant find.