does anybody know the specs on the "longer bolt" you have to put in while installing an AFX UDP?...im installing mine on sunday i think and i heard u need a longer bolt...thanks in advance
**Ebay intake w/ injen filter, 55mm TB, Thermal R&D NT Catback, F & R upper strut bars, **Waiting to be installed: Hurricane GS lower tie bars, AFX UDP
#94077, "RE: Need the bolt size for crank pulley" In response to Reply # 0 Oct-28-05 06:40 PM by xcasbonx
Originally posted by reeveso does anybody know the specs on the "longer bolt" you have to put in while installing an AFX UDP?...im installing mine on sunday i think and i heard u need a longer bolt...thanks in advance **Ebay intake w/ injen filter, 55mm TB, Thermal R&D NT Catback, F & R upper strut bars, **Waiting to be installed: Hurricane GS lower tie bars, AFX UDP
I've had an AFX UDP on my car for over a year now and have always reused the stock bolt.
Stock bolt spec is M12 - 1.75 pitch not exactly sure on the length though. Torque to 45 ft.lbs. I've found using a longer bolt helps with removing the pulley.
The overhaul manual specifies an M12 1.75 x 150mm long bolt used for installing the pulley using 2 special tools. I just used a block of wood and a mallet and drove it on till it was on all the way.
But this tells you to use a 120mm long bolt, I think it doesn't matter so long as you don't bottom it out and strip the threads.
it's been a while since I did mine, but I think I used a 150mm long bolt as well, they are kinda hard to find, I remember searching around alot for a suitable bolt. good luck!
----------- the first solution that comes to mind for any new problem with my car usually involves a can of gas and a match...
#94172, "RE: Need the bolt size for crank pulley" In response to Reply # 2
alright thanks guys...have any tips for me that would be helpful?..this'll be the most complicated install i've done so far lol, and im doin it with my uncle who ONLY works on older muscle cars
**Ebay intake w/ injen filter, 55mm TB, Thermal R&D NT Catback, F & R upper strut bars, **Waiting to be installed: Hurricane GS lower tie bars, AFX UDP
Search
Printer-friendly copy
2 Users in Chat
