well i recently rebuilt the motor on my dads 95 talon esi and it was drivin fine and last night on the highway the main fuse blew. the 30A engine one. so i temporarily stuck a screw in it and it started again after a few tries. but the starter was slugish and didnt sound right.i had to reset ecu to get it to start. so we drove a few blocks and it shut off again.. the screw was still in the fuse hole but now it just wont start. the starter was real slow moving and it was also making weird clicks and junk . my question is where is the common places to check for shorts in the wiring. cause i know the whole engine harness is ok cause i put it all back on myself after the rebuild.. but something keeps blowing the engine fuse.
91 civic hatch, homemade turbo+ LS motor = 12 sec street car.
#90618, "RE: main fuse keeps blowing. car wont work." In response to Reply # 0
lol what the hell are you thinking with putting a screw in that fuse... Your lucky the car didnt burn to the ground or the battery didnt explode. You have a short somewhere and with the screw its draining the battery making the starter slow. Start tracing wires. get a multimeter and ground one side of it and probe the contacts on the fuse side and see if you can zero out the resistance. That will tell you if theres a short to ground in those circuits.
_______________________________________ The end of the internet begins here... www.broke-off.com
#90630, "RE: main fuse keeps blowing. car wont work." In response to Reply # 2
Your shit's fucked up now but good.
$5 says the original problem was the wiring running along the right side of the engine is touching the EGR tube, melted, and has shorted out. Remove your intake snorkel and carefully inspect all the wiring within 6" of the EGR tube.
#90631, "RE: main fuse keeps blowing. car wont work." In response to Reply # 3 Jun-17-05 11:09 AM by DarkOne
Originally posted by thedawg Your shit's fucked up now but good.
Indeed. You'll be lucky if you have any integrity left in the harness because the entire wire that shorted out has probably melted and fucked up the rest of the harness with it.
Fuses blow for a reason. Can't possibly imagine what that reason could be.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#90632, "RE: main fuse keeps blowing. car wont work." In response to Reply # 4
Originally posted by DarkOne
Originally posted by thedawg Your shit's fucked up now but good.
Indeed. You'll be lucky if you have any integrity left in the harness because the entire wire that shorted out has probably melted and fucked up the rest of the harness with it. Fuses blow for a reason. Can't possibly imagine what that reason could be.
It blew because there wasn't a screw in the fuse holder, silly!
#90633, "RE: main fuse keeps blowing. car wont work." In response to Reply # 5
Originally posted by Ducking_Fumbass It blew because there wasn't a screw in the fuse holder, silly!
...and here i was about to add "PAGING DUCKING_FUMBASS TO THE WHITE COURTESY PHONE. DUCKING_FUMBASS TO TH WHITE COURTESY PHONE!" to my post, just because i know that this is the kind assinine stupidity you delight in reading about.
I expected better, though.
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#90636, "RE: main fuse keeps blowing. car wont work." In response to Reply # 7
Wow...a screw in place of a fuse. Absolutely brilliant!
Jason '11 Ford Mustang GT/CS '11 Ford Mustang V6 6-Speed (SOLD) '04 Nissan 350z Touring (SOLD) '95 Turbo Eclipse GS (SOLD and will be missed) '90 Talon TSi AWD (SOLD)
#90638, "RE: main fuse keeps blowing. car wont work." In response to Reply # 9
I'm just waiting for him to reply, saying that he blew his screw, and that he was going to use an M12X1.5 instead, for greater current handling capability. <cough>
#90640, "RE: main fuse keeps blowing. car wont work." In response to Reply # 10
Originally posted by Ducking_Fumbass I'm just waiting for him to reply, saying that he blew his screw, and that he was going to use an M12X1.5 instead, for greater current handling capability. <cough>
If it can hold my goddamn transaxle to my block, it can damn well carry a 30a current, right? Right?
______________________________ If a sentence found online has 35% misspellings or greater and includes at least two racially charged expletives, chances are it is a YouTube comment.
'95 Eclipse TurboGS (garage deco) '95 TSi AWD (restoring a survivor) '97 Talon ESi-T (poor impulse control) '99 Eclipse RS-T (daily beater) '13 Evo X (mostly stock) '17 Sienna (Middle Aged Dad Mobile)
#90639, "RE: main fuse keeps blowing. car wont work." In response to Reply # 3
Originally posted by thedawg Your shit's fucked up now but good. $5 says the original problem was the wiring running along the right side of the engine is touching the EGR tube, melted, and has shorted out. Remove your intake snorkel and carefully inspect all the wiring within 6" of the EGR tube.
#90674, "RE: main fuse keeps blowing. car wont work." In response to Reply # 14
I'd agree with the suggestion you're probably fuct now. I don't know why you would ever put something other than a slightly stronger fuse in there knowing there was a problem. But anyway I had a problem with my engine fuse blowing awhile back. I went through probably 4 of them in one week then a few more a couple weeks later but the problem eventually fixed itself. Don't know what to tell you now but to replace it with the proper fuse(maybe a few of them if it continues to blow) and pray for the same results I had. Otherwise start pulling the harness. Good luck anyway, Sometimes you have to learn the hard way.
Search
Printer-friendly copy
1 User in Chat
More Power, arr arr arr <- Tim Allen noise.