|
I did a search, didn't really find anything I havn't changed or replaced, realted to my problem. So here goes:
Well, after a completenew head, gaskets, and everything in between just about, my car was finally running. Now, I took it for a drive, runs fine, no stuttering, no problems, nothing. As soon as I get home and turn it off, it starts to smoke really badly, from the back of the engine, looks like from the valve cover or head. What could cause this? I torqued the cover down to 3.3 -> 6.6 -> 8.9 like chilton says, but I don't know. It doesn't leak oil, I am installing a new temp sensor because the old one breaks, just to make sure it isn't over heating. Even if it is what could cause this? I have new coolant, oil, oil filter, plugs gapped to .48, thermostat looks fine, but I have no clue how they suppose to look really. Is there anything else I should check for? I am at a loss, I don't really know what else it could be, aside from a blown engine, but I don't even race or abuse it.
Just some info on the engines life: 89,xxx miles. All belts replaced. Hoses checked and replaced. Oil change synthetic every 5k mile or 3 months, which ever first. No racing, or abuse, it's automatic.
Thanks for any help in advance.
Sal  '95 GSX - Big16G ~ Leaks, but atleast it runs.
|