hey i searched around quite a bit and haven't found the answer, could a slight overheat kill the cts?? i'm getting a code 22 after a pinhole leak in a radiator hose. it wasn't even hot enough to smoke or anything. i heard the hissing and turned the car off relatively quickly. but now i have the cel 22...?? chris
#88653, "RE: coolant temp sensor..." In response to Reply # 0
i dont know chris...maybe
but i mean, if i had a code 22...id just get a new coolant temp sensor. theyre not expensive at all, and then you wont have to worry about it later. knawmean?
_ _ _ _ _ _ _ _ _
96 Black ESi 91 Red TSI AWD (RIP) 02 WRX
"turnin wrenches for nine hours in the pouring rain, just to get the beast up and running again"
Aerospace Certified TIG welder for Precision Castparts in Portland, OR.
#88660, "RE: coolant temp sensor..." In response to Reply # 3
Actually think abouthat happened and where the cts is located.If coolant got all over the cts connector and the connector failed....would that be a poss cause of code 22? Check the connector first........
#88671, "RE: coolant temp sensor..." In response to Reply # 4
i had this problem about 3 months ago and posted on it, my upper rad hose was dripping down on the sensor and i was getting the check engine light too , went and bought a new sensor didnt fix the problem, tested the old one and come to find out it was still good so now i have 2 anyway to make a long story short i replaced the rad hose and stopped the drip and about a week later the cel went away i guess it dried up??? than my fqing cat died!!! welcome to the world of DSMs and CEL's mine never seems to go away for long.
98 RS: Mods: Custom Stage 2 Turbo kit , 55mm throttle body, gutted cat, evo cat back exhaust, p/p intake manifold,p/p Head, af-x underdrive pulley, B&M short throw shifter,Built bottom end Je pistons eagle rods 8.8:1 compression.
Status:Up and running again! nice new paint
Custom stage 2 hahn turbo kit Hahn Super 16g turbo (ceramic coated) Hahn manifold (ceramic coated) Hahn Downpipe assembly Hahn intercooler piping smic Hahn oil line kit Type s bov 2G Gsx smic walbro 255 fuel pump Synapse missing link Vortech s-fmu NGK Bkr7e11 Plugs A-pillar w/boost, a/f, oil pressure gauges
#88678, "RE: coolant temp sensor..." In response to Reply # 5
i feel ya on the "world of dsms" bro, i've been here for a while now and it's always something...always...on the connection, i did try to clean it first with electronic cleaner spray. no dice there either, i'll get a new sensor manana and we'll see what happens...chris