Just a note..I am not sure of what from the link below fits, but i picked the most likely in my opinion. If you know of something below that doesn't fit, please let everyone know. Have fun...Oh, anyone feel free to add in any other parts you feel should go along with this list, like the rockers (with part number)- as long as you're sure the part numbers are correct.

MOPAR PERFORMANCE NEON PARTS
-sourced from: http://www.mopar.com/m_perf_parts_product.jsp?categoryID=10019 (part pictures are within the links on the page)


ENGINE CONTROLLERS
These engine controllers are a direct replacement for the production units and provide increases in both horsepower and torque.

· Easy to install

· Improves performance without affecting driveability

· Requires the use of premium fuel

- 7600 rpm rev limit

· Emission exempt **(D-265-18)
DOHC Manual Transmission

P5007034 1995
P5007036 1996
P5007038 1997-99
------------------------------------------------------
LIFTERS

DOHC High Performance Hydraulic Lash Adjuster

· Improved hydraulic lash control

· Resistant to aeration

· Also fits 2.4L DOHC

· Sold in sets of four

P5007440 DOHC hydraulic lash adjuster
---------------------------------------------------------------------
Header Gaskets

Made of high temperature material for added durability.

· Flange-to-head gasket for race and street headers

P4876114 DOHC
--------------------------------------------------------------------
EGR Block-Off Plate Kit

Use to remove EGR valve for racing purposes only.

· Includes head and manifold plates with gaskets

· Lightweight 6061-T6 anodized aluminum

P5007276 1995-99 SOHC/DOHC
--------------------------------------------------------------------
High Performance Valve Springs

High-pressure single valve springs with damper. Used on exhaust and intake valves for all high performance applications.

· Made of chrome silicone

· Shorter fully compressed height

· Allows for increased valve lift

· Maintains spring load at higher RPM

· A must for high performance cams

· Sold individually

P4876636 All DOHC
--------------------------------------------------------------------
Ignition Wire Sets

Provide maximum conductivity for the ultimate in performance with Mopar Performance Parts' wire sets.

· Deliver maximum spark energy

· Custom fit

· 7.5mm blue silicone jacket

· Mopar Performance Parts logo on each wire

P4876511 All 2.0L and 2.4L Neon, PT Cruiser and Stratus DOHC
--------------------------------------------------------------------
Mobil 1 Premium Oil Filter

Designed to complement Neon's performance and Mopar's Mobil 1 Tri-Synthetic Motor Oil.

· 2-3 times higher burst strength than other conventional and premium filters

· More efficient at removing contaminants than other filters

· Provides maximum protection against impulse fatigue and cold engine starting stress

· Withstands 5 times normal operating pressure

P5007605 Premium oil filter
--------------------------------------------------------------------
Windage Tray

· Provides better engine lubrication by reducing windage and aeration at higher engine speeds

· Includes mounting hardware and pan gasket

P5007278 Windage tray for 2.0L/2.4L engines
--------------------------------------------------------------------

windage tray may not fit we have a different oil pan you could lack some clearance to fit the tray properly

the mopar performance computer MAY work but depending of the years you could have some rewiring to do on your harness and you will loose some features that not compatible
if you are atx it will not work at all

one of the 2.4 true pionners

Thankyou for the update. Yeah, the computers were on the site and I just thought I'd add them in there. I have a 95 mtx and hope something good comes out of the mopar ECU. It seems to be the only "simple solution" as far as 95 computers go...and thats IF it works.(crosses fingers) For $250 though, I might just have to try it out. I just got rid of my hesitation "knock on wood" so I might just wait till it comes back.