What type of material could I use in making my own custom cat-back?
Reason: At my old job, these guys owe there lives to me, they have lots of 2.25" & 2.50" SS piping and even 3". They also got lots of different degrees of elbows. Could I fabricate my own exhaust with SS or do you think this would be too heavy. I could do this for damn near free of cost. Like I said those beotches owe me.

Mod List:
-NGK BKR5E-11 Plugs
-Magnecore 8.5 Wires
-AEM CAI(thanx to endless73)
-GS-T Muffler
-Upper Front Strut Bar

no more 420A

only 4G63

i say go for it. alot of good systems are stainless. if its that cheap then you cant loose
-JASON

-jason

Stainless is a good material to use... but what kind of bends are they? Mandral bends would be best but... press bends and almost free is appealing too. Custom wrk is most of the time cheaper somehow??

"Character is doing the right thing when no one is looking."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

All Motor Beast in the Making

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

They are mandrel bends but it would be a cut and weld thing. I think I'm going to have them make a straight pipe that I could bolt on and off for the track and emissions. But like I said this will be nearly free maybe some bear or buds something. I think I'm going for it. Thanks for the info.

Mod List:
-NGK BKR5E-11 Plugs
-Magnecore 8.5 Wires
-AEM CAI(thanx to endless73)
-GS-T Muffler
-Upper Front Strut Bar

no more 420A

only 4G63

One of Adels buddies has titanium Bozzspeed sp? exhaust. DAMN! That is the shit!


Still being designed but worth a look!
www.extreme420a.com

------------------------------------------------
98 ESi
95 GS

There's a titanium exhaust out there for us? How much does that run? I'm asuming like three zeros in that number.

BUt my exhaust is going to be a custom job with Mandral bends welded together.

"Character is doing the right thing when no one is looking."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

All Motor Beast in the Making

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

Oh sorry it was on a WRX. It had well over 3 zeros


Still being designed but worth a look!
www.extreme420a.com

------------------------------------------------
98 ESi
95 GS

they stock system is SS

1998 dodge avenger 4 cyl AT
Mods are:
Not enough

custom carbon fiber....all i gotta say...hehe
Gots CF on the brain.....
Hellhound