Alright, who has their intake manifold ported/polished?

Who did the work?
How much did it cost?

"Character is doing the right thing when no one is looking."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads, EGT (partially installed)

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

I do.. I did it my damn self. Port match the plenum to the Intake ports (as big as gasket) and matched also to the bored TB. It makes a HUGE difference if you're turbo. Ask Alvin (semperboost) he rode in my car.

http://members.home.net/xtatdsm



I do, Mutiny did the TB, Intake manifold, and head all at once.
cost was $160 for the TB and Intake manifold (taking it off my car and putting it back was included too).

Adel






Ported TB and Intake manifold ** ported and milled head ** PT rockers and lifters ** Crane Drag cams #16 ** Crane valve springs and retainers ** AEM cam gears ** Hotshots headers ** Greddy Cat back ** Iceman CAI ** S-AFC ** and the usual handling mods

Adel.. I thought you were out of town. Drop me an email.

That's the best price I've seen Adel... do they have a web site I can check out? Are you happy with the work? If you have a web address or contact info I'd like to get that from you... I may be using them to get mine done.

"Character is doing the right thing when no one is looking."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads, EGT (partially installed)

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

Sorry but mutiny went out of business and jacked customers out of thousands of dollars in cash and products.

eclipse804@hotmail.com
http://www.importvenom.com
Import Venom - Parts and Performance

________________________________________

2004 WRX - WR Blue Pearl
1997 Eclipse GS - Royal Sapphire Pearl

http://members.home.net/xtatdsm



Michael_97RS, I don't think you have been around 2GNT for that long anyway Mutiny ran out of business hella long ago (more than 2 years for sure, if not more) when 2GNT started, he was like a God here, he was the first person to turbo charge his 420A and he told me he ran 12s with it (stock bottom end) he is a very smart guy and young too, anyway he decided to run his own business, and was one of the best vendors for our cars, no one could beat his prices. anyway, his company lasted for maybe 2 years at the most, and then he decided to fuck people over including (Eric R, his partner, andmyself) he took shit from people and vanished, he took a cylinder head from Eric R, my Turbo kit ( I left it with him cause he told me he had a buyer for it and wanted to make some money instaling it, and get me a bit more money than if I were to sell it on my own)

anyway, Mutiny has been out of the pic for long time, and he's been wanted by lotsa 2GNTs people.




Ported TB and Intake manifold ** ported and milled head ** PT rockers and lifters ** Crane Drag cams #16 ** Crane valve springs and retainers ** AEM cam gears ** Hotshots headers ** Greddy Cat back ** Iceman CAI ** S-AFC ** and the usual handling mods

Ahhh, so kind of like Skrilla, who has an intake manifold and money of mine, huh?

"Character is doing the right thing when no one is looking."
Michael J. Kulaga e-mail: Michael_97RS@2gntDSM.zzn.com
aol IM: MJKulga Website: http://highlander.dsmpower.com/

Injen CAI, 55mm TB, Hooker 4-1 Stepped Header, GS-T Muffler, AFX UDP, S-AFC, 8.5mm Magnecor Wires, SS Clutch Line, NRG Susp. Motor Mount Ins., FU/RU/RL STBs, TSW Blade 17x7.5, Bridgestone Potenza RE730 215/45ZR-17. Front KVR Cross-Drilled Rotors and Carbon Fiber Pads

To Be Installed: Rear disc brake conversion kit, SS Brake Lines, Rear KVR Cross Drilled Rotors and KVR Carbon Fiber Kevlar Pads, EGT (partially installed)

Firefly:
Mal: You don't know me, son, so let me put this to you plainly: If I ever kill you, you'll be awake. You'll be facing me. And you'll be armed.

Well Mike, as you know, mine is extrude honed but I got it used

"Keep on charging the enemy, so long as there is life."

Todd Scungio
98 RS
15.711 @ 87.43 MPH
2001 DSM Shootout Winner - NT Class

Modifications: GS-T muffler, Iceman cold air intake, AFX underdrive pulley, Brospeed header, Apexi Super AFC, Extrude Honed intake manifold, KYB AGX shocks, Powerslot front rotors, Porterfield R4S front brake pads, and occationally Mazda RX-7 rims with 225/50VR16 Michelin Pilot SX-GT tires

"Tutto fa brodo."

Todd Scungio
98 RS
15.173 @ 90.70 MPH

And also a 2011 Ralliart

Yeah I remember good ole Ronnie and mutiny raceworks back in the day. Hell they even convinced Extreme motorsports to carry their 4G63 cams for a hot second. But anyway I think you might wanna start taking your sh*t local where you can find and marital art a brotha down if need be. Shit that was my original manifold now gone to waste. Anyway back to the question:
I took a 5sp dremel with flex extension and a barrage of stones, sanding and polishing bits and went to town on what must have been a good 5 or 6 hrs of straight metal removing. More of the same the next day until I just got tired of trying to perfect the damn thing (as if I knew what was optimal). Anyway the results didn't look all too dramatic as far as size until looking on the floor and having enough metal dust to make some powdered aluminum rods. No more ruff cast flashing. Got it pretty smooth (only to have the PVC likely Muck it right back up). The only place I couldn't reach were the actual round plenum. Got all the runners all the way up to the plenum. I took it to a local race shop called bunner engine development along with my head and TB to be port matched by someone who knew what they were doing. They charged $40 to portmatch the head and about $30 or so to match the TB. It revved much free'r and felt much better down low and in the midrange. Couldn't feel much seat of the pants difference in the top end. This was pre turbo. I spent the most money having the manifold and TB installed (like $150) and they said it was a bitch (same people who put my engine in 3Xs I might add.

PS: Skrilla give em his shit, he paid me good money for it. where ever you are (you must peak over here even if you dont post anymore). Is keeping peoples shit worth going to hell (or jail) and eternal misery (or internal fuckery by a dude name bubba when it comes back to you)?

I feel a little bad having long spent the money on a part you bought and never go to use. Da well I'll get over it :o


http://stan2gnt.homestead.com/home.html
Stan2gnt
Stan2va@aol.com
95 Talon 420A-Turbo
Former and future nitrous user

:farfrommugen:
Yes I still own a 2gnt.
Damn right I've been here longer than U
klassic_liven@yahoo.com

I did mine when my timing belt broke back in june. I did a very minor porting job on a CNC mill at work then I polished it using
a dremel and the cone shaped fine sandpaper attachments. But I mainly did it because I was bored at work and I wanted to clean up any casting flash that was left over. If anyone has an intake mani. that they want machine work done on let me know.

Eric (Nkysmrf on AIM And Aol and my new name on AIM is Eclipse2GNT)
97 Eclipse GS

97 Eclipse GS

How much would you charge?

Mod List:
-NGK BKR5E-11 Plugs
-Magnecore 8.5 Wires
-AEM CAI(thanx to endless73)
-GS-T Muffler
-Upper Front Strut Bar

no more 420A

only 4G63