I have an opportunity to buy a brand new set of all 4 motormount inserts by prothane. Heres what makes this opportunity interesting. The passenger side and driver side are already pressed in a stock mount. So, I get front and rear inserts, and the sides preinstalled in a set of mounts. So basically its plug and play with the sides. He wants $105 shipped. Is this a good deal. I think they are like $65 from summit but I would need to press them. I could always sell my stockers (side) after I install these to recoup some cost. Thoughts???

Second Place "Sanford Sound SLAP 2005" Mild 2-Door
http://www.sanfordsound.com/carwash2005.htm
Second Place "Scrapefest 2002" 2nd Gen Mild
1995 GS AT, 97-99 Conversion.
2000 BMW Z3 2.8
1999 Chevy K2500 crew cab
5 jets skis, 3 snowmobiles, 2 ATVs. BRAAP!
Member # 1147

actually.. you dont press them in. you have to get the stock ones out.. but thats the only difficult part. the upgraded ones are in two pieces.

You can just burn out your stock mounts with a torch, and cut the rings with a hacksaw (that's what I did).

Joel Baldridge, ASE Certified Master Technician, Audi Certified Expert Technician

Ok, thanks. Sweet ^^^ pic! So, purchase or pass??

Second Place "Sanford Sound SLAP 2005" Mild 2-Door
http://www.sanfordsound.com/carwash2005.htm
Second Place "Scrapefest 2002" 2nd Gen Mild
1995 GS AT, 97-99 Conversion.
2000 BMW Z3 2.8
1999 Chevy K2500 crew cab
5 jets skis, 3 snowmobiles, 2 ATVs. BRAAP!
Member # 1147

Go ahead and buy them for that price... it'll save you the frustration. It's not hard to do, you just have to get a little creative and it takes a little time.